Posted on August 30, 2022 by Jeff -
The ABP2 Series are piezoresistive silicon pressure sensors offering a digital output for reading pressure over the specified full-scale pressure span and temperature range. They are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and accuracy errors (which include nonlinearity, repeatability, and hysteresis) using an onboard Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure and temperature are updated at approximately 200 Hz. All products are designed and manufactured according to ISO 9001 standards. The liquid media option includes an additional silicone-based gel coating to protect the electronics under port P1, which enables use with noncorrosive liquids (e.g. water and saline) and in applications where condensation can occur. The ABP2 Series is available in tube packaging. Pocket tape and reel packaging are available upon request.
Features
- Total Error Band (see Figure 1): As low as ±1.5 %FSS
- Liquid media option: Compatible with a variety of liquid media
- Long-term stability: ±0.25 %FSS
- Accuracy: ±0.25 %FSS BFSL
- Wide pressure range: 4 bar to 12 bar | 400 kPa to 1.2 MPa | 60 psi to 175 psi
- High burst pressures (see Table 9.)
- Wide operating temperature range of -40°C to 110°C [-40°F to 230°F]
- Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F]
- 24-bit digital I2C or SPI-compatible output
- IoT (Internet of Things) ready interface
- Ultra-low power consumption (as low as 0.01 mW type average power, 1 Hz measurement frequency)
- Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 1
- REACH and RoHS compliant
- Food grade compatible
- NSF-169, LFGB, and BPA-compliant materials
- Temperature output available
Potential Applications
- Medical: Ventilators/portable ventilators, CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosing, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea equipment, urine analyzers, and wound therapy
- Industrial: HVAC transmitters, life sciences, material handling, pneumatic control and regulation, process gas monitoring and valve positioning/positioners
- Commercial: Air beds, coffee makers, washing machines, level measurement, dishwashers, vacuum cleaners, hand dryers, and rice cookers
- Transportation: Air brakes, CNG monitoring, forklifts, and fuel level measurement
Posted on May 5, 2021 by Jeff -
Sensata | Cynergy3 is a leading manufacturer of high-voltage & radio frequency reed relays, reed switches, controllers, wireless sensors, and industrial sensors including level, pressure, flow, and temperature. Their wide range of products provides extraordinary levels of service and outstanding reliability within critical applications and rigorous environments.
Posted on December 31, 2020 by Jeff -
The PTE7100 pressure sensor is the ideal solution for customers with challenging measuring requirements for general industrial applications in the mid-to-high pressure ranges. Utilizing Sensata’s automotive leading Microfused Strain Gauge (MSG) with best-in-class accuracy, the PTE7100 features a wide range of ports, connectors, and analog electrical outputs for ease of integration in various industrial applications.
The PTE7100’s high-quality stainless steel design features a hermetic port with no internal o-ring seals, making it compatible with most media and suitable for harsh environments. With extreme shock and vibration capabilities, a wide operating temperature range, and high proof and burst pressures; the PTE7100 is ideal for industrial applications including injection molding, CO2 HVAC systems, and other hydraulic or pneumatic applications.
Features
- Measuring range from 0-50 bar to 0-600 bar (0-725 to 0-8700 psi)
- High accuracy
- Wide range of ports, connectors, and electrical outputs
- Stainless steel design with hermetic port
- Storage and operating media temperature -40-125°C; Operating ambient temp. range -40-100°C
- Snubber option for dampening pressure spikes due to hammer and cavitation
- REACH/RoHS/CE compliant
Applications
- Hydraulics and Pneumatics
- Mobile Hydraulics and Off-Highway Vehicles
- Pumps and Compressors
- Air Conditioning and Refrigeration Systems
- Plant Engineering and Automation
Click here for a datasheet.
Posted on August 21, 2019 by Jeff -
The NTBT Wireless Bluetooth Pressure Transducer allows users to monitor pressure and temperature remotely 24/7 from anywhere in the world with an internet connection. The NTBT functions with both Apple and Android apps at no additional charge and gives users text/email alerts for high- or low-level alarms. It also features data logging capability with downloadable reports from the Data Portal anytime.
LOW ENERGY CONNECTION MODES:
Normal (used with handheld smart devices):
This mode takes measurements one time per second when connected. When the sensor is not connected, it operates in advertising mode and sends a signal every two seconds, allowing the sensor to conserve battery life.
Watchlist (used with the wireless router):
This mode takes a measurement every 30 seconds, storing the data in the advertising packet. The sensor is running 24/7 and constantly communicating with the wireless router.
- Wide pressure range capability from -14.7 PSI (full vacuum) to 10,000 PSI
- Wetted parts are one piece, 17-4 SS (no internal O-rings or welds), with 316 SS available
- Polycarbonate dome
- 1% and 0.25% accuracies available
- Pressure connections include 1/4 NPT male, 7/16-20 SAE #4, G1/4 male and 7/16-20 UNF female with 45° flare and valve depressor (HVAC market)
- Operating temperature range from -40° to 185°F
- 2 times overpressure standard
- Measures both pressure and temperature
- 24-36 month battery life
- Field-replaceable and suitable for permanent installations
- Powered sensor available
Posted on August 21, 2019 by Jeff -
With its proprietary digital/ASIC technology, the NT25 Series Pressure Transducer features field-proven redundant sensing elements that eliminate the need for solder in resistors or trim pots that can drift over time. The NT25 is an industry first — offering stability and accuracy over a wide temperature range at a lower cost than competitive units. With its optional 4x or 10x overpressure and an optional integrated temperature/pressure digital switch feature, the NT25 is truly unmatched in today’s market.
- 24V digital output for pressure or temperature switch point
- Voltage and current outputs
- Custom pressure ranges and outputs available
- 0.25% accuracy
- ASIC technology with no zero/span potentiometers
- All stainless steel welded housing
- IP-69K-rated seal available (for high-pressure wash down)
- Innovative low current consumption, ideal for custom wireless solutions
- Programmable systems available for OEM/systems integrators for in-house configuring of outputs, ranges, and set points to reduce inventory and lead times
- Calibration certificates available (contact customer service)
Posted on August 1, 2019 by Jeff -
100% Made in the USA
For nearly 70 years, Nason has been setting a new industry standard for customer-driven innovation. We’re passionate about getting it right for our customers. That’s why we’re always willing to create exactly what you need — precisely for your application, built to last and designed to perform just as you intended.
Every day, our team of experts carries out that commitment from inside our state-of-the-art 70,000-square-foot facility in Walhalla, South Carolina. We’re proud to be privately owned, allowing us to be nimble and creative for our customers — and ensuring that our switches, cylinders, and transducers continue to lead the industry in quality, efficiency, and flexibility.
Posted on July 31, 2019 by Jeff -
Since 1988 the Sensit brand has been a world leader in ceramic strain gauge technology and is the only UK manufacturer of ceramic sensors. From low-cost OEM ready-to-use pressure capsules to fully packaged transducers, our expertise provides solutions.
Features
- Small, rugged, and economical; high EMC immunity
- Rearrangeable models and bespoke designs
- UKAS and traceable calibration
- 1% total error band (-40°C to-105°C)
- 100V ratiometric output 5V supply, 0.5 to 4.5V ratiometric 8-30V supply
- 4-20mA or 1-5V output
- Packard, M12, or Mini-DIN connector
Applications
- Oil and gas
- In-laboratory
- Test and measurement
- OEM
- Medical equipment
- Off-highway
Posted on September 7, 2017 by Jeff -
TT Electronics manufactures and supplies a comprehensive range of temperature, pressure, flow, and level measurement products through its Roxspur Measurement & Control product line. Our expertise is widely proven in diverse and challenging sectors such as aerospace and defense, water, energy, automotive, offshore exploration, medical, fire, glass, and steel.
Our products include sensors, thermocouples, thermometers, transducers, transmitters, flowmeters, and controllers. We also offer a range of associated products including pumps, displays, power supplies, data recorders, portable calibrators, and thermal imaging cameras.
Other TT Electronics brands include: BI Technologies, IRC, and Optek
Posted on August 30, 2017 by Jeff -
When reliability is demanded, Honeywell delivers. Heavy Duty Pressure Transducers are found in applications where they cannot be easily replaced — where supreme durability is a top priority. That’s why you’ll find Honeywell S&PS heavy-duty pressure products performing expertly in many potential applications, such as compressors and hydraulic controls, and in industries as diverse as aerospace, medical, transportation, agriculture, refrigeration, and industrial. Our full line of products delivers enhanced performance and reliability, plus: absolute, gage, and sealed-gage measurement; a wide array of pressure ranges, port styles, termination types, and outputs; package types from miniature surface mount sensors to high-end stainless steel isolated (for stringent process control); pressure ranges from 3 psi to 8,000 psi; and corrosion resistance.
Posted on August 29, 2017 by Jeff -
Kavlico’s Ceramic Capacitive Pressure Sensors incorporate the latest generation sensing elements with state-of-the-art ASICs. Our Sensors and Transmitters are available in multiple standard configurations as well as customized adaptations. Ceramic Capacitive Pressure Sensors are designed for harsh environments, with superior EMI protection, high overpressure capability, outstanding shock and vibration performance, and exceptional long-term stability.
Recent Comments