Product Type: Fans / Thermal Management

LPT Series – EC Fans for Harsh and Potentially Explosive Environments

Mechatronics IP68 EC Fans for Harsh and Potentially Explosive Environments

Mechatronics ATEX Fan Solutions

Mechatronics offers a variety of fans for use in potentially hazardous applications and environments. ATEX Fans are intended for use in equipment or protective systems where potentially explosive atmospheres can occur (as defined by EU directive 2014/34/EU). Mechatronics ATEX Fans are EC Fans (electronically commutated AC fans) made with encapsulated motors rated to IP68. ATEX Rating levels for Mechatronics fans are listed in the table below. Only fans with the ATEX symbol and rating on the label are intended for ATEX applications.

Features

  • Reduced Power Consumption – as much as 70% lower than that of standard AC fan models
  • Global Voltage option allows the fan to operate from 100VAC ~ 240VAC
  • Improved Performance offers higher airflow than standard AC fan models
  • Speed Control options include pulse width modulation (PWM speed control) input
  • Alarm Output options including tachometer or locked rotor alarm
  • Environmental Protection options available including conformal coating or encapsulated motor (up to IP68)

Applications

  • Commercial Refrigeration
  • Air Conditioning
  • Battery Compartments
  • Food Processing Equipment
  • Freezers & Icemakers
  • Heat-Pump Dryers
  • Water Heaters
  • Industrial Refrigeration
  • Chemical Storage
  • Oil and gas equipment
  • R290 propane and other flammable refrigerants
  • Battery charging & Power storage systems
  • HVAC
  • Lighting
  • Diagnostic equipment

Mechatronics ATEX-rated fans have the suffix “EX” in the full part number and ATEX is indicated on the label.

MR Series – High Airflow DC Fans

Mechatronics high airflow DC axial fans are Ideal for applications where space is limited and high airflow is required. The fixed blade design straightens airflow to pull air out of the fan while the rotating blade pushes air forward. Available in 5/12/24/48vdc models in sizes ranging from 30mm-120mm.

Features

  • Increased Airflow and Static Pressure Up to 45% performance increase over standard DC models
  • 5/12/24/48 Volt DC options available
  • Alarm Output options including tachometer or locked rotor alarm
  • Speed Control options include pulse width modulation (PWM speed control) input
  • Environmental protection options available include perylene and conformal coatings

Applications

  • Ideal where space is limited
  • Rack mountable servers
  • Networking equipment
  • Medical Equipment

Included Series:

MR3010
MR4020
MR8025
MR8032
MR9225
MR9232
MR9238
MR1225
MR1238

Hughes Peters has stock on the following part numbers:

MR3010E12B-RSR

Fans

  • Available in 12VDC; 1 or 2 Speed
  • Available with/without loom or terminals
  • Available in 24V 1 Speed

Representative Fan Offerings: Go to Build-A-Fan Form for Your Specific Fan

7800 Base

  • 0900-052-000
  • 12V 2 Speed
  • No Switch

8000 Base

  • 0900-072-000
  • 12V 2 Speed
  • No Switch

600-7 Base

  • 0900-092-000
  • 12V 2 Speed
  • No Switch

9000 Base

  • 0900-062-000
  • 12V 2 Speed
  • No Switch

8000 Base

  • 0900-252-140
  • 12V 2 Speed
  • Black Guard & Blade
  • Loom Only
  • No Switch

9000 Base

  • 0900-062-080
  • 12V 2 Speed
  • Isolated Ground On Base
  • No Switch

Fan Bases

Comes in black or metallic color.

8000 Fan Base

  • Metallic
  • Black

9000 Fan Base

  • Black

600-7 Fan Base

  • Metallic
  • Black

7800 Fan Base

  • Metallic

BGA Heatsinks

Ohmite now carries a line of heatsink solutions that are specifically designed for your BGA and PBGA applications. Ohmite’s heatsinks provide a low-cost thermal solution for these specific packages in multiple sizes. Our heatsink solutions can be attached to devices with adhesive thermal tape, making installation as seamless as possible. Custom heatsinks are available upon request.

Green Fan Cord

This Patent Pending design is revolutionary to the AC fan industry. Designed to simply replace your current fan cord, no additional wiring, circuit boards, control boxes, or design changes are required. The GardTec Green Fan Cord will automatically turn your AC cooling fan on when the system heat rises, then turn it off when the system heat drops, allowing the fan to run only during those times when the system calls for additional cooling. Save energy and costs, reduce fan-generated noise, and increase product life.

Easy Installation, Plug in the Fan and Go… Controlling the internal ambient temperature of applications is critical to the proper functioning and life expectancy.

IP69K-Rated Fans

Introducing the only series of cooling fans that have achieved IP69K rating, offering the highest proven protection available against closed range, high-temperature, high-pressure spray-downs.

These fans are designed to be protected from environmental factors and are the desired component for harsh applications. This new series of IP69K fans is available in 12, 24, and 48VDC, with an airflow from 10.9 to 346 CFM. Sizes available include 40mm, 60mm, 92mm, 120mm, 150mm, and 175mm. They are available with a new metal casing with high reliability in high temperature, plastic magnet, and if desired, stainless NMB bearings with ceramic balls.

Applications

  • Harsh Environments (Outdoor/Indoor)
  • Factory Automation
  • Food Processing Industry
  • Refrigeration
  • LED Lighting System Cooling
  • Inverters
  • Telecom
  • Horticulture

Expected Lifetime

  • 25˚C 100,000

NMB manufactures over 150 types of cooling fans, and one of these will certainly be the right fan for you.

Fans and Fan Accessories

Qualtek offers low-cost, high-tech AC & DC axial fans with sizes ranging from 25mm – 280 mm, DC voltages from 3.3VDC – 60VDC, and AC voltages from 115VAC – 230VAC. Our fans include many special features such as: IP55, IP56M, and IP67 rated, GR487 salt fog rated, speed sensors, alarm functions, and much more upon request. Each fan is offered with a variety of bearing types: two-ball, sleeve only, and our newly developed hydrodynamic bearing with better performance than sleeve and lower cost than two-ball bearings. Every fan is available with a wide range of speeds from ultralow to superhigh.

Our fan accessories are famous worldwide. These consist of wire form and plastic guards, plastic air filters, aluminum and stainless steel air filters, fan cords, and our patented noise-reduction vibration sleeves.

Tangential Blowers

Tangential, or cross-flow, blowers are low profile, quiet, and deliver high air delivery at relatively low flow rates. ebm-papst offers these blowers with an optional asymmetrical shaded-pole motor, capacitor motor, or GreenTech EC motor with integrated commutation electronics (including tach output and PWM or analog output).

Applications

  • Stove jacket cooling
  • Thermal storage heaters
  • Overhead projectors
  • Tanning beds
  • Air-conditioning and heating units

S-Force Tubeaxial Fans

These axial and centrifugal fans are ebm-papst’s most powerful air movers. Extremely efficient drives and optimized aerodynamics provide extremely fast, powerful, and efficient cooling for electronic components of all kinds. Available in a range of sizes and delivering a variety of air flows, these high-performance fans exemplify the highest innovations in motor technology, fluid mechanics, and electronics.