1554 Series
The 1554 series comes molded in ABS or polycarbonate plastic and provides watertight protection for boards and other small electronic devices.
Features
- Ideally suited for mounting printed circuit boards or DIN rail-mounted components.
- ABS Versions are molded from general-purpose materials that carry a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV-stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL-listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two-piece “tongue & groove” construction prevents access from oil, dust, and water.
- Replaceable gasket is one piece made from high-temperature, UL-listed silicone. Supplied loose inside the enclosure (not preinstalled).
- Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size, which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion-resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self-captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D.”
- Threaded (M3) integral brass inserts and/or standoffs (#6 self-tapping screws) for PC board or inner panel mounting in all but the smallest size (“B”).
- Vertical PC card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
