Posted on August 9, 2019 by Jeff -
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments.
- For use as instrument enclosures; electric, hydraulic, or pneumatic control housings; electrical junction boxes or terminal wiring enclosures.
- Impressive styling features make the Eclipse Junior a suitable addition to any high-tech equipment installation.
Standards
- UL 508A Type 3R, 4, 12 and 13
- CSA Type 3R, 4, 12 and 13
- Complies with
- NEMA Type 3R, 4, 12 and 13
Construction
- Body and cover are formed from 16-gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts, or holes.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- 14-gauge welded brackets provide for enclosure mounting.
- Continuously hinged cover has 304 stainless steel hinges and provides 180° opening.
- Door latches feature the added safety of quarter-turn slot requiring use of tool for opening.
- Quarter-turn latches formed from black zinc die-cast.
- Seamless poured-in-place gasket.
- Models larger than 4″x4″ include a removable 14-gauge galvanized inner panel.
- Internal threaded weld studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
- Grounding and panel mounting hardware provided.
Finish
- Cover and enclosure are finished with a recoatable powder inside and out with choice of ANSI 61 smooth Gray (GY) or RAL7035 textured light gray (LG).
- Inner panels are unpainted galvanized steel.
Posted on August 9, 2019 by Jeff -
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wall mount applications.
- Sloped top prevents water from resting on top as well as provides potential for control mounting.
- Unique hinge design allows for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- NSF – ANSI 169
- Not all accessories shown maintain NSF standards. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 4, 4X, 12, and 13
- IEC 60529, IP 66, IP69K
Construction
- Formed 304 or 316L stainless steel.
- Top sloped 25°
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches (316 stainless steel quarter turns) feature the added safety of quarter-turn slot requiring use of tool for opening.
- Door hinges (316 stainless steel) are easy to clean, provide 180-degree openings, are easily removed for modifications, and are interchangeable.
- Seamless poured-in-place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Posted on August 9, 2019 by Jeff -
Key Features
- Rugged, die-cast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Two-piece “tongue & groove” construction with a replaceable one-piece silicone rubber gasket prevents access from dust and water. Gasket supplied loose inside the enclosure (not preinstalled).
- Ideal for repetitive opening and closing.
- Four recessed stainless steel machine screws secure lid into tapped holes.
- Easy to wall mount using “through box – blind hole” construction, outside of gasket protection.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). (NOTE: Except for 1590Z060, 1590Z061, 1590Z062, and 1590Z063)
- Designed to meet IP68.
- North American Mark of Safety – cUL & UL listed. Certified to Type 4, 4X, 6, 6P.
- Painted versions are painted inside and out with a tough powder paint. Choice of textured black or smooth gray (RAL 7001).
- For nonmetallic (glass-reinforced polyester) versions of these enclosures, see series 1590ZGRP
Posted on August 9, 2019 by Jeff -
Key Features
- Designed to house PC boards or for equipment interfacing.
- Sized for standard Eurocards.
- PC boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes
- Versions with metal end plates include two aluminum end panels – finish matched to extruded aluminum body – and two black ABS plastic bezels (your option to install).
- Versions with plastic end plates include two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue, or red anodized finish
- Self-adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head Phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Posted on August 9, 2019 by Jeff -
Features
- Strong construction yet lightweight using all aluminum components
- Suitable for desktop or rack-mountable applications.
- Knockdown design ships unassembled for easy handling and shipping protection.
- Strong construction using:
- extruded aluminum side panels 0.125″ (3.2 mm) thick
- extruded aluminum front & rear panels 0.125″ (3.2mm) thick
- flat aluminum top and bottom panels 0.064″ (1.6 mm) thick
- Can be used with or without rack mounting brackets (one pair included)
- Front & rear panel are interchangeable.
- Enclosure is finished in rugged, textured, black powder coat.
- Includes top, bottom, sides, self-adhesive rubber feet, rack mount brackets, and all assembly hardware
- Pull handles & adjustable rear bracket rack mount kit (for deeper models) are not included with unit (see tables & accessories below).
- RoHS Compliant.
- Manufactured in North America.
Posted on August 8, 2019 by Jeff -
A variety of cable tie lengths, materials, and mounting methods makes this common product versatile for a number of applications/environments.
Posted on August 8, 2019 by Jeff -
A variety of solutions for neatly routing cables/wires in a variety of applications/environments.
Posted on August 8, 2019 by Jeff -
A variety of solutions that enable applications to regulate temperature without introduction of dust and/or moisture.
Posted on August 8, 2019 by Jeff -
A variety of strain reliefs that provide exactly that – strain relief on a cable without any protection from moisture.
Posted on August 8, 2019 by Jeff -
A variety of liquid tight conduit & fittings to provide protection from moisture in outdoor/harsh environments. No strain relief provided.
Recent Comments