Archives: Products

The CC16WP is a part of the most advanced CAN I/O generation from MRS Electronic. The core, the 32-bit processor, provides you with more computing power and thus faster computing cycle times. You also benefit from a more powerful gateway functionality and complex programming options for your applications. Due to the extremely high flexibility of the multifunction inputs, the CAN I/O is well prepared for the most diverse, cross-industry areas of application.

All in all, the compact CC16WP offers maximum application flexibility in the smallest installation spaces in order to implement applications cost-effectively and efficiently. With the correct installation position, the high protection class IP6K8 can still be achieved. The AEF-certified order variant with a 2 MB flash memory is also compatible with different ISOBUS stacks and can communicate with other linked components such as terminals or implements. The module is also CAN FD capable.

• 15 I\O
• 2x CAN
• 1x CAN FD
• 1x LIN
• IP6K8 Waterproof

The compact car-compatible can gateway module with PLC function is used for the simple expansion of existing vehicle functions with low wiring requirements. It is freely programmable and equipped with three CAN interfaces.

• 30 I/O
• 3x CAN
• IP53
• 9-18V

The Micro Gateway is a compact gateway for automotive applications. Due to its small size and easy installation, it offers a wide range of applications. The gateway in the 30 x 30 x 50 mm plastic housing offers four different order options.

• 2x I/O OR
• 2x CAN & 2x LIN
• IP6K8 Waterproof
• 9-32V

The new Micro Gateway is a compact gateway for automotive applications. The core piece, the 32-bit processor, provides you with higher performance and thus secure routing and gateway functionality at high bus loads. Thanks to the reduced housing size, you can now also use the gateway in standard relay boxes with a height of 40 mm. The 2 I/Os are now also PWM capable. Implement larger and more complex programs and applications by increasing the flash memory to 2 MB. The RAM has also been increased from 12 KB to 256 KB. This gives you even more memory to temporarily store the higher amount of data.

The Micro Gateway is available in the following variants: 2 x CAN bus + 2 x LIN Master or 2 x I/Os. The CAN/LIN variant offers you the option of integrating 12 V as well as 24 V LIN sensors, for example for operating a 12 V rain light sensor in a commercial vehicle. This function is only available in a separate version. The module is also CAN FD capable.

• 2x I/O OR
• 2x CAN & 2x LIN
• 2x CAN FD
• IP6K8 Waterproof
• 9-32V

The most compact gateway from MRS Electronic is the Micro PLC CAN LIN. This gateway has been developed and built on the basis of a Micro PLC CAN. It offers extensive functions, packed in a 30 x 30 x 40 mm compact plastic housing. It has nine pins and each has a CAN and LIN interface. The product can be delivered as a LIN slave or as a LIN master circuit and is perfect for tight installation spaces.

• 4x I/O
• 1x CAN
• 1x LIN
• IP6K8
• 8-16V

Motor controller with 4×5 A motor outputs for DC motors and integrated current monitoring. In many outdoor electronics applications, there is an increasing demand for small motor control units that can drive several DC motors cost effectively via different bus systems. This is where the 4-in-1 Motor Controller comes in.

• 4 Inputs (analog)
• 2 Outputs (PWM capable)
• 1x CAN
• IP53
• 9-32V

The two-fold proportional valve controller with CAN bus is used for the continuous control of two loads and is particularly used for the regulation of proportional valves. It is required for many hydraulic applications and is realized because of its two outputs double functionality with the same installation space. CAN High-Speed enables data exchange between the modules and ensures easy integration into existing systems. The microcontroller-based current control allows the desired output current to be specified using application software.

Control and readout of all values is possible via CAN bus. Fluctuations in supply voltage and temperature are compensated. This ensures a constant flow rate. To counteract stiction and hysteresis effects a dither frequency can be adjusted.

• 5 Inputs (analog)
• 2 Outputs (PWM Capable)
• 1x CAN
• IP6K8 Waterproof
• 9-32V

The PROP CAN 2CH DTM with CAN bus is used to continuously control two loads and in particular to control proportional valves. Due to its two outputs, it implements double functionality with the same installation space. In combination with the DEUTSCH DTM connector, it offers you robust quality and is ideally suited for extreme environmental conditions.

• 2 Inputs (analog)
• 2 Outputs (PWM Capable)
• 1x CAN
• IP6K8 Waterproof
• 7-32V

The waterproof CAN I/O PLC Waterproof PRO V2 with 16 I/Os is convinced by the various application possibilities in numerous control applications. In addition to eight I/Os that can be configured as inputs or outputs, it offers six analog and two digital inputs. The CAN controller also has integrated protection diodes to limit the free-wheeling voltage generated by the inductive loads.

The module can be used to control four current-controlled proportional valves. The five-volt reference output allows additional sensors to be supplied with voltage. The supply voltage can be measured internally via terminal 30.

• 7 inputs (6 analog, 1 digital)
• 8 I/Os (6 analog, 2 digital)
• 1x CAN
• IP6K8 Waterproof
• 9-32V