Posted on March 2, 2022 by Jeff -
Adam Tech’s High-Speed Modular Plugs support device bandwidth requirements with dependability and speed. These plugs boast speeds of Cat 5, Cat 6, Cat 6a, and Cat 8. The series is supported by accessories such as strain relief, plastic hoods, and plating options. Adam Tech is dedicated to supplying signal transmission applications with top-quality modular products.
Features & Benefits
- 8P8C
- Speeds: Cat 5, 6, 6a, and 8
- Gold plating options
- Plugs for standard flat and round cables
- Metal-shielded plugs
- Strain relief
- Plastic hood
- Solid wire contacts
- UL certified
Applications
- Internet
- Computer networking
- Telecommunications
Posted on March 2, 2022 by Jeff -
The OPB350 series liquid sensor is designed to work with 1/16” [1.6mm] 1/8” [3.2mm], 3/16” [4.8 mm], and 1/4” [6.3 mm] outside diameter clear tubes. When output reference circuitry is added, multiple output states such as “fluid present,” “no fluid present,” and “no tube present” can be recognized.
Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the “liquid present” and “no liquid” states. If no tube is present, the phototransistor sinks current between the dark fluid and clear fluid states. The customer will have to identify the typical current values for each situation. The ratio between the different states allows acknowledgment of different conditions.
Features
- Can identify if the liquid is present in clear tubes that have an outside diameter of 1/16” [1.6mm], 1/8″ [3.2mm], 3/16″ [4.8 mm], or 1/4″ [6.3 mm]
- Opaque plastic housing enhances ambient light rejection
- Printed circuit board mounting or 24” (610 mm) 26 AWG wires
Applications
- Noncontact fluid sensing
- IV fluid
- Oils and other petroleum products
- Colored fluids
- Toner fluids
- Water
Click here for a datasheet.
Posted on March 2, 2022 by Jeff -
OAR & OAR-XP resistors give designers stable and accurate sensing of AC and DC current in a compact SMD format while elevating the hotspot of the PCB. Features include:
- Bulk metal technology
- Open-air design reduces PCB heating
- Flexible leads to mitigate thermal expansion
- Power rating 2W, 3W & 5W
- Values down to 1mΩ
- ±1% tolerance
- TCR to 50ppm/ °C
- Zero-ohm 65 amp jumper version
These resistors are available in a comprehensive range of powers and resistance values.
Click here for a datasheet.
Posted on February 25, 2022 by Jeff -
CDE offers a wide selection of standard and custom screw terminal, snap-in, and board mount capacitors, used extensively in the most critical applications, ranging from defibrillators and medical imaging to radar systems and UPS power backup for large data systems. Look to our innovative Flatpack series of aluminum electrolytic capacitors for ruggedized applications and space savings.
Products Include:
- Axial
- Radial
- Surface Mount
- Prismatic
- Snap-In
- Screw Terminal
- Motor Start
- Photoflash & Strobe
Click here for datasheets on specific products.
Posted on February 25, 2022 by Jeff -
THA/THAS Series capacitors are thinner and more cost effective than most alternative technologies. Unlike traditional cylindrical electrolytics, THA/THAS capacitors have sealed, laser-welded aluminum cases to eliminate the need for space-wasting end seal gaskets. Compared to cylindricals, flat THA and THAS capacitors are up to 60% smaller by volume. The design includes a valve to vent hydrogen gas buildups that may otherwise cause pressure-related swelling. The 105°C-rated THAS Series adds a 0.38mm form-fitting stainless-steel sleeve to further prevent swelling at the highest temperatures. Can replace arrays of SMT, radial, or axial aluminum electrolytic and solid tantalum capacitors.
Applications
- Tablets/Laptops
- Specialized instruments
- LED driver modules
- Compact power supplies
- Drones and RPV’s
- Set-top boxes
- Narrow
- 1U rack-mounted devices
- Video monitors
- Solid state drives
- Displays
- Security systems
Click here for a datasheet on the THA Series.
Click here for a datasheet on the THAS Series.
Posted on February 25, 2022 by Jeff -
Possessing much lower ESR than other capacitor technologies, CDE’s aluminum polymer capacitors are ideal for board-level power conversion where high ripple current capability is needed. We offer this technology in molded chip, vertical chip (V-Chip), and radial form factors. For applications requiring the higher CV range of aluminum electrolytics, with the low ESR properties of the aluminum polymer, explore our Hybrid Polymer-Aluminum Electrolytic.
Products Include:
- Radial
- Vertical Chip
- Molded Chip
- Flat
Click here for datasheets on specific products.
Posted on February 25, 2022 by Jeff -
We offer a broad line of AC- and DC-rated film capacitors for industrial, military, and medical applications ranging from standard AC motor run types to custom DC pulse applications. Only the industry’s highest grades of film dielectric are used to ensure the best possible performance. We are one of just a few remaining manufacturers of paper and film combination dielectrics for high-performance power conversion and power supply applications.
Products Include:
- Power Film, AC Applications
- Power Film, DC Applications
- Axial
- Radial
- SMT
- X2 and Arc Suppression
Click here for datasheets on specific products.
Posted on February 25, 2022 by Jeff -
As the inventor of the mica capacitor, we are the world’s foremost authority and largest manufacturer of mica dielectric capacitors. Our RF mica capacitors feature superior high Q performance without the undesirable properties associated with ceramic and porcelain capacitors. Cornell Dubilier mica capacitors are extensively used in military, aerospace, and medical applications, offering both COTS and Military-Grade capacitors with established reliability.
Products Include:
- Dipped
- Surface Mount
- Transmitting
- Partial Discharge Coupling
Click here for datasheets on specific products.
Posted on February 25, 2022 by Jeff -
Our rechargeable lithium-ion batteries are different in design from other similar-looking batteries. A new encapsulation technology significantly increases storage capacity by completely utilizing the space within the cell case. Not only has the energy density per lithium ion been improved, but the failure rate is superior to older designs.
Products Include:
Click here for a datasheet.
Posted on February 25, 2022 by Jeff -
Also known as ultracapacitors, double-layer capacitors, or electrochemical double-layer capacitors (EDLCs). Whatever you call them, CDE likely has what you need, offering a comprehensive range of capacitance values and voltages. Our technology is used in a wide variety of applications from battery backup in smart meters to regenerative braking. Choose from board mountable coin type and radial form factors or work with us to develop higher voltage custom modules with active or passive balancing.
Products Include:
- Supercapacitors Cells
- Hybrid LIC Supercapacitor
- Modules
- Supercapacitor Coin Cells
Click here for datasheets on specific products.
Click here for a comparison sheet.
Recent Comments