Posted on July 20, 2020 by Jeff -
Techspray air dusters blow away dust, microscopic contaminants, links, metallic oxide deposits, and other soils that can damage sensitive electronics. When these contaminants get in the way of vents or fans within the device, they create a buildup that leads to overheating and/or shortages. Our dusters are 100% nonflammable HFC-134a-based dusters. The safest choice for energized equipment.
Features & Benefits
- 100% pure HFC-134a
- Nonflammable
- Non-ozone depleting
- Moisture-free
- Zero residue
- Safe on plastics
- VOC exempt
- Velocity 11.3 m/s
Posted on July 20, 2020 by Jeff -
Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases the visibility of cold solder joints, cracks in printed circuit boards, and oxidized junctions.
Features & Benefits
- 100% pure HFC-134a
- Nonflammable
- Non-ozone depleting
- Moisture-free
- Zero residue
- Safe on plastics
- VOC exempt
- Chills down to -60°F (-51°C)
Posted on July 20, 2020 by Jeff -
G3 has a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Formulated to be powerful and nonflammable, yet economical. Eliminates brushing and scrubbing, saving time and materials.
Features & Benefits
- Powerful cleaner and flux remover
- Nonflammable
- Rapid evaporation
- Zero residue
- Proven effective for lead-free processes
- Non-ozone depleting
Posted on July 20, 2020 by Jeff -
Convenient, low-linting alcohol wipes are presaturated with 99+% pure IPA. Four choices of packaging available:
- Individually wrapped wipes -Ideal for tool kits and field applications
- Flip-top tubs – Spring-loaded lid automatically closes and sealed top reduces waste from dry-out
- Disposable tubs – Lower-cost disposable tub
- Refill rolls – Replacement wipes fit in either Flip-top or Pop-up tubs to save money and reduce waste
WIPE OPTIONS
Individually wrapped wipes (1610-50PK)
- Nonwoven cellulose-poly material
- 5.5”x5.5” (140mm x 140mm)
- 3g IPA/packet
Nonwoven Polyester Material (1610)
- 5”x8” (127mm x 203mm)
- 550g IPA/roll
- 100 wipes/roll
Commercial-Grade Nonwoven Cellulose-Poly Material (1610CP)
Engineered for high-volume PCB assembly and other types of production. This cellulose-poly material has greater absorbency and is less likely to snag or shred, making these wipes ideal for stencil and PCB cleaning.
- 5”x8” (127mm x 203mm)
- 650g IPA/roll
- 150 wipes/roll – 50% more wipes & less packaging waste!
Specifications: ASTM D770-05.
FEATURES & BENEFITS
- 99+% pure IPA
- Ideal for electronics cleaning
- Plastic-safe
- Lint-free & tear resistant
Posted on July 20, 2020 by Jeff -
The Flux-Off® Rosin formulation is a fast-drying aerosol that quickly and completely removes R, RMA, RA, and synthetic flux residue. With its low surface tension and superior wetting properties, Flux-Off® Rosin removes harmful residues in tight tolerance areas.
Available with The BrushClean™ System – Gentle scrubbing action of a brush combined with high-performance flux remover.
FEATURES & BENEFITS
- Safe on plastics
- Removes all rosin-based fluxes
- Removes ionic and non-ionic activators
- Dries fast
- Leaves no residue
- Flammable
- All-Way Spray valve – even sprays upside down
- Available with BrushClean™ System
APPLICATIONS
- Cleans type R, RMA, RA, and Rosin-based no-clean flux
Posted on July 20, 2020 by Jeff -
Electro-Wash® PX is a fast-drying, one-step precision cleaning and degreasing agent safe for most plastics. Engineered with very low surface tension, this high-pressure aerosol formulation flushes areas clean and evaporates instantly leaving no residue.
FEATURES & BENEFITS
- Safe on plastics
- Flammable
- Extra cleaning strength
- Dries fast, leaves no residue
- Removes organic and ionic soils
- Aerosol utilizes All-Way Spray valve; sprays in any direction
- Liquid may be used in cold dip and rinsing applications
APPLICATIONS
- Removes oils and hydraulic fluids from mechanical assemblies
- Cleans handling soils from circuitry before reassembly
- Removes grease from assembly lines
- Cleans fiber optic connectors
Posted on July 20, 2020 by Jeff -
Ultrajet® 70 is an economical general-purpose air duster with a new BIGGER blast for electronic applications. Its exceptional purity jet instantly cleans surfaces free of particulate contamination. Ultrajet® 70 is engineered to remove dirt, dust, oxide particles, and other airborne particles instantly, and can be used to facilitate the accelerated drying of solvent cleaners.
FEATURES & BENEFITS
- Nonflammable
- High-powered cleaning strength
- Bigger blast than competitive dusters
- Zero VOC
- Filtered to 0.2 microns
- Leaves no residue
- 100% ultra-pure HFC-134a
- Safe on plastics
APPLICATIONS
- Cleaning particles from contacts and relays
- Removing debris from precision optics
Posted on July 20, 2020 by Jeff -
Freeze-It freeze spray is engineered for locating thermal intermittent electrical components and cooling printed circuit boards. This circuit refrigerant system is nonflammable, residue-free, and provides fast cooling action.
FEATURES & BENEFITS
- Pinpoint spray isolates individual components without freezing surrounding areas
- Rapidly cools components to -60°F/-51°C
- Nonabrasive, safe for use on plastics and other sensitive surfaces
- Ultrapure, filtered to <0.2 microns
- Nonflammable
- CFC/HCFC free
- Evaporates quickly
- Leaves no residue
APPLICATIONS
- Cool Equipment for Testing
- Dissipate Heat While Soldering or Desoldering
- Isolate Thermal Intermittent Components
- Test Circuit Traces for Continuity
- Test Printed Circuit Boards for Stress Fractures
- Track Intermittent Failures and Shorts
Posted on July 20, 2020 by Jeff -
Isopropyl Alcohol (IPA) Wipes remove solder paste, inks, and other contaminants. Alcohol wipes are ideal for all general cleaning applications. Alcohol wipes are well suited for touch-up cleaning of automatic printer stencils and cleaning of semi-automatic printer stencils during and at the end of production runs. IPA wipes contain ultrapure Electronics Grade IPA. Isopropyl alcohol wipes are available in a C-fold wipe contained in a convenient dispensing box, or in a pull-through tub.
FEATURES & BENEFITS
- Ultrapure mixture of IPA and deionized water
- Strong, will not tear, shred, unravel, or lint
- Holds up to the most rigorous scrubbing
- SIP125P, SIP100P, and SIP91P pull-up presaturated wipes are ideal for cleaning semi-automatic printer stencils, and touch-up cleaning of automatic printer stencils
- IPA100B wipes are lint free and precut—excellent for cleaning fine pitch stencils
- Plastic safe
APPLICATIONS
- Presaturated Wipes are well suited for touch-up cleaning of automatic printer stencils and cleaning of semi-automatic printer stencils during and at the end of production runs.
Posted on July 20, 2020 by Jeff -
Foamtips™ Swabs are constructed from medical-grade foam which features the best open-cell structure, providing excellent particle entrapment characteristics. The foam is thermally bonded to the swab handle without using adhesives. These foam swabs are ideal for general cleaning applications.
FEATURES & BENEFITS
- Precision cleaning swabs with polyurethane foam head
- Purest medical-grade foam
- Traps surface particles while cleaning
- High solvent capacity; holds solvent well
- Fiberless construction does not generate loose fibers or particles
- No adhesives or binders are used in the construction
- Economical for high-quantity applications
APPLICATIONS
- Clean excess adhesives after gluing
- Clean micromechanical devices
- Remove Flux residues from printed circuit boards
- Apply small precise quantities of adhesive or lubricants
Recent Comments