Posted on November 6, 2019 by Jeff -
Available with Q10, Q14, Q16, Q19 & Q22 series bezels, the RGB feature is customizable to offer a large array of colors and tones. By mixing the colors red, green & blue, additional colors such as cyan, magenta, yellow, and white become available.
Features
- RGB provides a new bolder and brighter status indication
- Color animations can be adjusted by the user
- LED lens is available in flush or prominent
- RGB LEDs fit Q10, Q14, Q16, Q19 and Q22 series bezels
- 4-wires common anode means these are only accessible in terminal option 5
- Standard 200mm wire termination
- Rear epoxy, front panel sealed to IP67
Posted on November 6, 2019 by Jeff -
APEM’s popular I series range of pushbuttons is now evolving with the new IX series, designed to meet demanding markets. The IX series combines the high qualities of the IP and IA series with a backlit switch and 12 mm diameter compact bushing and flexible elastomer membrane actuator. IX series is recommended for harsh environments and all key markets of APEM: material handling, agriculture machinery & defense.
Features
- Pushbutton for harsh environment
- Illuminated or non-illuminated
- Compact (12 mm bushing)
- Tactile effect
- Sealing : IP67, IP69K
- Marking on request
Posted on November 6, 2019 by Jeff -
Q series panel mount LED indicators in new half-inch (0.5″ / 12.7 mm) panel cut-out. Available with an 8 mm colored diffused epoxy lens or 8 mm water clear super bright LEDs.
Features
- Half-inch (0.5″ / 12.7 mm) panel cut-out
- Bright chrome, black, or satin gray bezel finish
- Prominent, recessed, and flush bezel styles
- Terminals: 2.8 x 0.8 solder lug/fasten, pins or 200 mm long wires
- IP67 sealing option (EN 60529)
- Voltage: 2 VDC – 220 VAC.
Posted on October 30, 2019 by Jeff -
Flexible multi-mode/multi-range timers with 5A contacts in octal plug in format. Time range up to 180 hours. Both power on and momentary input trigger type SPDT and DPDT contact configuration.
Key Features
- 4 selectable operation modes on each model
- External start, reset, and pause inputs
- Panel mount or socket mount
- Large variety of timing functions
- Power and output status indicating LEDs
Posted on October 30, 2019 by Jeff -
IDEC now offers a new series of IEC-style contactors and starters, YC Contactors. These contactors feature weld-resistant silver alloy contacts, giving them a higher level of reliability and an extra-long life. Contacts are also cadmium free for environmental safety.
YC overloads feature bimetallic thermal overload relays directly mounted to the contactor. Plus a full range of accessories are available for this series including top and side mounting auxiliary contact blocks, coil surge suppressors, timers, and more. A mechanical interlock accessory can be used when using two contactors to reverse a motor, to prevent both sets of contacts closing at the same time.
Key Features
- 35mm DIN rail or direct panel mounting
- Switching current 5A-300A
- Models available to switch from 1/3HP up to 200HP motors
- Auxiliary contacts available
- 50/60Hz AC coil and DC coil models available
- Silver alloy, cadmium-free, long-life contacts
- Bimetallic thermal overload relays
- Meets IEC, UL, c-UL, and other international standards
- CE marked
Posted on October 30, 2019 by Jeff -
The NRA series of circuit breakers offer the ultimate in flexibility. Different actuator styles allow for differentiation of look and feel. Various delay characteristics and current ratings satisfy applications from logic-level protection of PLCs, sensors, or other low-current devices up to medium-sized motors and heaters. Most units can be through-panel mounted or plugged into DIN rail sockets. Standard termination is via .250″ quick-connect terminals, sockets use M3.5 screw terminals.
Key Features
- Available in 3 different actuator styles
- Current ratings up to 30A at 250VAC or 65VDC
- 1-, 2-, or 3-pole models
- Optional DIN rail or surface mount sockets
- Variety of delay-tripping curves
- Optional “inertia delay” to prevent nuisance tripping on motor or transformer loads
- Optional alarm contacts or auxiliary contacts
- Reliable to over 10,000 operations
- UL recognized, CSA certified, VDE
Posted on October 30, 2019 by Jeff -
Littelfuse digital temperature indicators are easily integrated, eliminating the need for an analog-to-digital conversion. When temperature increases above a specific value, these devices increase exponentially from a low to a very high resistance. The digital temperature indicators are ideal for systems that value size, accuracy, and simplicity.
Posted on October 30, 2019 by Jeff -
Thermistor probes and assemblies are invaluable for sensing temperature in a variety of industries ranging from HVAC/R and environmental controls to automotive and white goods. Littelfuse standard and customized probes and assemblies offer very precise and extremely reliable thermal monitoring in the most demanding applications.
Posted on October 30, 2019 by Jeff -
Littelfuse surface mount thermistors are manufactured using the most advanced equipment and technology available. Designed for measuring, controlling, and compensating for temperature with the utmost accuracy, they are available in a variety of sizes and configurations suitable for mounting using solder, wire bond, or epoxy.
Posted on October 30, 2019 by Jeff -
Littelfuse leaded thermistor options include the highly accurate precision interchangeable thermistors, as well as high-temperature axial leaded glass encapsulated thermistors and glass-coated radial leaded chip thermistors. A wide variety of resistance values and tolerances are available.
Recent Comments