Posted on August 23, 2019 by Jeff -
Tri-Mag, LLC offers a full selection of DC-to-DC converters for a wide range of applications in numerous industries. Our vast DC power converter line spans from high voltage DC-DC converters, with a wide range of input voltage ratings for efficient operations in applications powered by unregulated voltage sources, to PCB mountable low voltage converters with high stable regulated output.
All the components on your PCB do not run on the same voltage. Step up or step down to the required voltage with a DC-DC converter from Tri-Mag, LLC. Extremely stable and dependable, our selection of DC-DC converters is perfect for use in a variety of applications.
Whether your firm is an OEM computer manufacturer or a healthcare industry equipment supplier, you can trust our DC-DC converters to provide years of trouble-free power conversion. Tri Mag, LLC manufactures converters from 1 watt up to 60 watts, for low and medium power uses. Single, double, and triple output models are available, as are units for wide-range input.
The features/applications below can be used for both.
Features
- PCB Mountable
- High Stable Regulated Output
- Thermally Conductive Encapsulant
- 100% Burn-In And Triple Tested
- MTBF > 400,000 Hours
Applications
- Local Area Network
- Isolation Devices
- Telecommunications
- Industrial And Testing Equipment
- Battery-Powered Equipment
- Medical Equipment
- Distributed Power Equipment
Posted on August 22, 2019 by Jeff -
Surface mount (SM) molded wirewounds with compliant leads to eliminate solder joint failures from board flex or thermal expansion. Power ratings from 1 to 5 watts, resistance values from 0.01 to 5K ohm, tolerances as low as 0.5%. High surge handling capability in a surface mount device and can be used to replace multiple SMD film chips for space and size reduction.
Posted on August 22, 2019 by Jeff -
Radial Leaded MOVs in a wide range of sizes and voltages. Provides transient surge protection for AC voltages up to 1000V. Peak current handling up to 6500 amps and energy handling up to 625J. UL1449 certified file no. E476752.
Posted on August 22, 2019 by Jeff -
Molded surface mount MOVs in sizes 3225 and 4032, AC voltages from 60 thru 300V. Peak current handling up to 1200 amps and energy handling up to 30J. Surface mount option to low and medium voltage 5mm and 7mm radial-leaded disk varistors.
Posted on August 22, 2019 by Jeff -
Standard, mini, and AEC-compliant surface mount MELFs in sizes 0102, 0204, and 0207, and power ratings from 0.3W to 1W. Resistance values from 0.1 ohm to 1 Megohm, in tolerances as low as 0.1% and TCR as low as 15 pppm. Exceptional electrical and environmental stability and surge handling with low self-heating.
Posted on August 22, 2019 by Jeff -
High-voltage chip (HVC) resistors offer working voltages up to 3500 volts. Chip sizes from 0603 through 3512, tolerance as low as 0.1%, and TCR as low as 25 ppm. Resistance values up to 50G available. Offers very low electrical noise and low VCR to 1 ppm/volt with excellent high-voltage pulse handling.
Posted on August 22, 2019 by Jeff -
High-current molded shunt (HCSM) resistors offering 5W power ratings in a 2818 chip size. Resistance values 4, 5, 10, 15, 20, and 25 milliohms available in tolerances as low as 1% and TCR of 75 ppm or 200 ppm. Excellent long-term stability, high operating temperatures allowing full power up to 100C, and derated operation up to 170C. AEC compliant.
Posted on August 22, 2019 by Jeff -
Ultra-precision current sensing chip resistors offering sizes from 0603 through 4527 in power ratings from 0.33W up to 5W. Resistance ranges from 0.25 milliohm to 120 milliohm, in tolerances as low as 0.5%, and TCR as low as 15 ppm. Excellent long-term environmental and electrical stability. AEC compliant.
Posted on August 22, 2019 by Jeff -
Bare element radial-leaded thru-hole sense resistors (BR) in power ratings from 1W to 5W. Resistance ranges from 5 milliohm to 100 milliohm in tolerances as low as 1%. Flameproof, non-inductive, low-cost current sensing, with low thermal board stress due to the raised element.
Posted on August 21, 2019 by Jeff -
Mechatronics Low-Power Fans are ideal for applications where only AC power input is available and low power consumption is a requirement. Mechatronics Low-Power fans are electronically commutated providing the efficiency of a DC fan with the simplicity of connecting to an AC power supply. Available with global voltage input accommodating 90VAC to 265VAC, allowing for a single model to be used in products for both 115VAC and 230VAC applications. Mechatronics Low Power Electronically Commutated (EC) fans are available in sizes ranging from 60mm-250mm.
Features
- Reduced Power Consumption – as much as 70% lower than that of standard AC fan models
- Improved Performance offers higher airflow than standard AC fan models
- Global Voltage options allow fans to operate from 90VAC ~ 265VAC
- Speed Control options include pulse width modulation (PWM speed control) input
- Alarm Output options including tachometer or locked rotor alarm
- Environmental Protection options available including conformal coating or encapsulated motor (up to IP68)
- ATEX-Rated options for use in potentially explosive locations
Applications
- Commercial Refrigeration
- Appliances
- Food processing equipment
- Enclosures – cabinets/servers
- Medical equipment
- Inverters & Power Supplies
- Battery charging & Power storage systems
- HVAC
- Lighting
- Diagnostic equipment
- Air Conditioning
- Battery Compartments
- Food Processing Equipment
- Freezers & Icemakers
- Heat-Pump Dryers
- Water Heaters
- Industrial Refrigeration
- Chemical Storage
- Oil and gas equipment
- Locations where R290 propane and similar refrigerants are used
Recent Comments