Product Type: Plastic / non-Metallic

1554 Series

The 1554 series comes molded in ABS or polycarbonate plastic and provides watertight protection for boards and other small electronic devices.


  • Ideally suited for mounting printed circuit boards or DIN rail mounted components.
  • ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB.  For indoor use.
  • Polycarbonate versions are UV stabilized for outdoor use.  Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
  • Polycarbonate versions are cUL and UL 508A listed (File # E65324).  ABS plastic versions are not UL listed.
  • Enclosure color is a light gray (RAL 7035).
  • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
  • Replaceable gasket is one piece made from high temperature, U.L. listed silicone.  Supplied loose inside the enclosure (not pre-installed).
  • Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size, which is 4,4X only)
  • ABS Plastic versions are designed to meet IP66.
  • Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
  • Lid screws are self-captivating (lid holes are threaded with the first installation of lid screws).
  • Internal features are maximized for mounting options and vary with size:
    • Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
    • Threaded (M3) integral brass inserts and/or standoffs (#6 self-tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
    • Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).

1556 Series

1556 series ABS plastic enclosures are ideally suited for mounting printed circuit boards, IoT equipment, and other small electronics.


  • Can be used in a tabletop configuration using rubber feet (included) or two different wall-mount configurations using wall mount foot kit (sold separately).
  • Rounded corners and face provide a more modern look.
  • Lap joint construction provides protection against access of dust and splashing water.
  • Available in black, gray, or white flame retardant ABS plastic with light satin texture.
  • Molded from flame retardant material which carries a flammability rating of UL94 V-0.  For indoor use.
  • Designed to meet IP54.
  • Lid hardware and 4x rubber feet included with enclosure. Lid is secured with high strength #6 x 1/2″ self-tapping Plastite screws.
  • Aluminum inner panels are available as accessories.  Sold separately.
  • Multiple mounting locations inside the lid and base of the enclosure allow for easy PCB mounting or can be used with Hammond aluminum panels (sold separately).
  • Accessories include aluminum inner panels and 4-packs of mounting feet which can be used for flange mounting or keyhole mounting.

IP67 Air and Moisture Vent

  • IP-rated vent for plastic and metal enclosures
  • Breathable e-PTFE membrane keeps out water and dust
  • Rated IP67 (submersible)
  • Minimize the risk of gasket breach caused by changes in air pressure
  • Reduce condensation that may corrode electronic components
  • Body is made of corrosion-resistant UV-resistant polycarbonate plastic
  • Membrane is hydrophobic (water repellent) and oleophobic (low oil absorption)
  • Seals using an O-ring washer
  • Long, maintenance-free service life
  • M6*1.5 vent plug
  • 0.47 inches long x 0.55 inches diameter
  • Airflow 160ml/min @dp=70 mbar
  • Color: Gray
  • *1 pound per square inch equals 6.895 KPa or 68.9476 mbar
  • *About 0.0145 pounds per square inch equals 1 mbar (~0.015 psi)


NBB Series

The NBB Series of NEMA boxes is one of Bud’s most popular enclosures for wet, dirty, and/or corrosive environments. They feature plastic latches and an all-plastic construction. Most of the gasketed enclosures in this series have been tested and approved to UL508-4x specifications, with a few being approved to UL50-4x. All NBB Series enclosures meet IEC529 IP66 requirements.

NBF Series

The NBF Series of NEMA boxes have plastic latches and hinges for an all-plastic construction. These gasketed enclosures meet NEMA 1, 2, 4, and 4x and IEC529-IP66 requirements, making them suitable for wet, dirty, and/or corrosive environments. This versatile family includes indoor and outdoor versions, versions with clear covers, and an option for a padlockable steel latch. Depending on the model, they are made of ABS, ABS polycarbonate blend, or polycarbonate-PBT blend plastic. The NBF Series is suitable for many applications.

Industrial Enclosures

  • Aluminum, ABS, Polystyrene, Polycarbonate, and Polyester enclosures
  • Broad range of sizes
  • NEMA 4X available
  • Functional and appealing designs
  • Large selection of accessories
  • Customization and imprinting services are available


IP67 Enclosures designed for use with control switches and electronic equipment. Available with lids that have pre-moulded cut-outs, Bulgin’s waterproof junction boxes accept industry standard 22mm switches and bases with M20 threaded cut-outs to suit standard cable glands. With robust ABS plastic, these IP rated waterproof and dustproof plastic enclosures are ideal solutions for providing protection to electronic components and systems that are exposed to harsh environmental conditions.

PW SERIES – UL94-5VA ABS Enclosure

House PCBs and other components in this stylish utility enclosure. The PW Series is molded of quality ABS plastic that is flame-retardant rated as both UL94-V0 and UL94-5VA. It consists of a body and a screw-down cover. Four mounting bosses simplify PCB installation. The smooth cover models are ideal for UV-cured full-color printing, which Bud can supply on request.
There are four variations:

  • Cover has a smooth surface, no mounting flanges. (Models with no suffix)
  • Cover has a smooth surface, comes with mounting flanges. (Models ending in MB)
  • Cover has a mar-resistant textured surface, no mounting flanges. (Models ending in T)
  • Cover has a mar-resistant textured surface, comes with mounting flanges. (Models ending in TMB)

Features & Benefits

  • Made from black ABS plastic
  • Meets both UL94-5VA and UL94-V0 flammability ratings
  • Stylish rounded design
  • PCB mounting bosses in base
  • Plain or molded-on flanges for surface-mounting
  • Thread-forming cover screws directly into base
  • 2 cover styles to choose from:
    • Smooth area on cover suitable for optional direct UV cured print
    • Textured area for mar-resistant finish
  • Designed for indoor use


  • Controls
  • GPS
  • Wi-Fi and other connectivity

Click here for a datasheet.

PU Series NEMA 6P/IP68 PC Enclosure

These polycarbonate plastic enclosures incorporate a streamlined design and superior water ingress resistance. Designed and tested for a wide variety of outdoor applications and adverse conditions. Rated to NEMA 1, 2, 4, 4X, 6, 6P, 12, and 13. Meets IP66 and IP68 requirements. UL Listed to UL 508A. Transparent covers are available depending on the model. All models feature molded mounting flanges for easy installation.

Benefits and Features

  • Modern streamlined design with multiple sizes to choose from
  • Rated to NEMA 4X & 6P and Meets IP66 & IP68 requirements
  • UL Listed to UL 508A, Type 1, 2, 4, 4X, 6, 6P, 12, & 13
  • Designed and tested for a wide variety of outdoor applications and adverse conditions
  • Molded from durable, UV-stabilized polycarbonate UL94 V0 rated
  • Continuous silicone rubber gasket is preinstalled to ensure watertight seal
  • Stainless steel screws and brass inserts for cover assembling
  • Mounting bosses in base
  • All sizes include molded flanges for enclosure mounting


  • Wi-Fi applications
  • Battery charging
  • Monitoring systems
  • Wastewater
  • Agriculture
  • GPS tracking
  • Automation & controls

Click here for a datasheet.

Electronic Enclosures

Davies Molding has been providing electronic enclosures for over 50 years. Ideal for industrial and electronic applications, Davies plastic enclosures are the economical choice while remaining portable and durable. With offerings including Phenolic and ABS thermoplastic, there is sure to be a fit for any of your electronic casing needs.

Click here for a datasheet.

Hammond Manufacturing

Hammond Manufacturing began manufacturing tube radio sets in a backyard workshop in Guelph, Canada in 1917.  In the century since, they have expanded into a global company with offices in North America, Europe, Asia, and Australia.  Hammond offers a broad range of over 12,000 standard products including electrical enclosures, electronic enclosures, industrial grade outlet strips, racks and data center infrastructure, and transformers.   Hammond serves hundreds of industries and thousands of customers.  For over 100 years, their success has come by maintaining a high level of quality and focusing on service excellence.