Product Type: Pushbutton

AH Series Antivandal Pushbutton Switch

Posted on August 13, 2020 by -

Features

  • Vandal Proof / Vandal Resistant
  • IP67 Sealing Degree
  • 19mm
  • Center Dot or Ring Illuminated

Momentary in function, the AH Series is 19mm in size with a single-pole, single-throw function. IP67 sealing degree with stainless steel body, the flush actuator is red LED ring illuminated. The LED voltage is 12VDC.

Specifications: The electrical rating of the AH Series is 1A at 24VDC/125VAC or 0.5A at 250VAC. The sealing degree is IP67. Electrical life is 50,000 cycles with contact resistance of less than 50 milliohms. Dielectric strength is 2,000Vrms between contacts and contact to LED. Insulation resistance is greater than 100 milliohms. The actuation force is 550 ± 50gF actuator travel of 2.5 ± 0.3mm. Operating and storage temperature is -25°C to 70°C. Materials: The actuator and threaded body are stainless steel or anodized aluminum with an inner switch body of polycarbonate and terminal support of PBT. The LED lens is polycarbonate with silver alloy contacts and tin-plated brass terminals. One hex nut and one “O” ring are supplied with each switch.

Click here for a datasheet.

AHU Series Antivandal Pushbutton

Posted on August 13, 2020 by -

Features

  • Vandal Proof / Vandal Resistant
  • UL / cUL Approved
  • IP67 Sealing Degree
  • 19mm
  • Center Dot or Ring Illumination

The UL/cUL-approved AHU is IP67, 19mm in size, the AHU is available momentary or latching. The flush actuator can be nonilluminated, or bicolor ring or dot illuminated. Also available is an illuminated universal standby symbol. LED color options include red, yellow, green, blue, and white. LED voltage ranges from 6VDC to 220VAC.

Specifications: The electrical rating of the AHU Series is 3A at 125VDC or 3A at 250VAC. The sealing degree is IP67. Electrical life is 50,000 cycles with mechanical life of 1,000,000 momentary and 500,000 cycles latching. Contact resistance of less than 50 milliohms. Dielectric strength is 2,000Vrms between contacts. Insulation resistance is greater than 1,000 milliohms at 500VDC. The actuation force is 200 ± 50gF for SPDT and 250 ± 50gF for SPDT with actuator travel of 3.2 ± 0.25mm. Operating and storage temperature is -20°C to 65°C. Materials: The actuator and threaded body are stainless steel or anodized aluminum with an inner switch body and terminal support of PBT. The LED lens is polycarbonate with silver-plated copper alloy contacts and terminals. One hex nut and one “O” ring are supplied with each switch.

Click here for a datasheet.

ANP Series Pushbutton Switch

Posted on August 13, 2020 by -

The miniature size ANP series pushbutton switch is available with termination options of solder lug, PC pin, quick connect, horizontal mount right angle, vertical mount right angle, PC pin with support bracket or snap-in support bracket. Both SPDT or DPDT, and momentary or latching, the ANP offers numerous bushing options, cap styles and cap colors.

Features

  • Mini Pushbutton Switch
  • Wide Variety of Terminals
  • Panel Mount
  • Gold Contacts Available

Click here for a datasheet.

BH Series Pushbutton Switch

Posted on August 13, 2020 by -

Available in both 16mm & 19mm, this IP65 vandal and splash resistant switch offer many choices of actuator styles including flush, round, raised, flush ring or dot illuminated, raised ring illuminated, flush international standby symbol illuminated, round ring or dot illuminated or raised dot illuminated. Body finish options include nickel plated brass, gold plated brass, brushed stainless steel or anodized aluminum in black, green, red, blue or yellow. The BH Series also offers a choice of solder lug, .110” quick connect or screw terminal termination. Bi-color LED options are red, yellow, green, blue, white and orange and many combinations of the same.

Features

  • 16mm & 19mm
  • Vandal Proof Switch
  • IP67 Sealing Degree
  • Center Dot or Ring Illumination
  • Panel Mount Switch

Click here for a datasheet.

BNP Series Pushbutton Switch

Posted on August 13, 2020 by -

The subminiature size BNP series pushbutton switch is available with termination options of solder lug, PC pin, quick connect, horizontal mount right angle, vertical mount right angle, PC pin with support bracket or snap-in support bracket. Both SPDT or DPDT, and momentary or latching, the BNP offers numerous bushing options, cap styles and cap colors.

Features

  • Subminiature Pushbutton Switch
  • Wide Variety of Terminals
  • Panel Mount
  • Gold Contacts Available

Click here for a datasheet.

ES Series Pushbutton Switch

Posted on August 13, 2020 by -

The round, illuminated ES Series pushbutton switch is available with bicolor LED options and a matte body finish. Actuator options include round, flat, raised and now square with a square frame. IP67 process sealed, the ES Series is SPST normally open or SPST normally close and momentary or latching.

Features

  • Bicolor LED Option
  • Matte Finish
  • Round or Flat Actuator Option
  • IP67 Sealing Degree Standard

Click here for a datasheet.

FH Series Pushbutton Switch

Posted on August 13, 2020 by -

The FH Series offers a small but robust package size of 12mm. Panel mount style, the FH Series is heavy-duty and rugged in construction, both splash and vandal resistant. Available with a choice of flush or raised actuator styles, non-illuminated, bi-color ring illumination or dot illumination. Finish options are brushed stainless steel and anodized aluminum in black, green, red, blue and yellow. The FH Series is momentary in SPST. Bi-color illumination choices are red, yellow, green, blue, white and orange.

Features

  • 12mm
  • IP67 Sealing Degree
  • Vandal Proof
  • Momentary or Latching
  • Center Dot or Ring Illumination
  • Panel Mount

Click here for a datasheet.

CIT Relay & Switch

Posted on August 10, 2020 by -

CIT Relay & Switch manufacturers electromechanical relays and switches, along with our Picker Components branded solid-state relays. Wherever opportunities arise, CIT works to provide the best product for the application and the most compelling support experience. Through paramount service, selection, quality, and value—we strive to be the best. CIT places the customer first. We work with our customers on simple to complicated projects, tailoring custom solutions and designs. Our technical, engineering, and customer support personnel are well-trained and can help with your design selection requirements. With a state-of-the-art test lab, CIT can address custom or standard test requirements under a variety of conditions to validate your application. From small to large projects, we are here to help with all our customers’ testing and design needs.

Momentary Sealed Button Switch

Posted on July 20, 2020 by -

Sealed button switches are rated for up to IP68 NEMA 250. Rated for 250mA, 30W max, AC non-inductive load. RoHS compliant. Ideal for applications spanning from communications equipment, medical equipment, and instrumentation.

Pushbutton Switches

Posted on July 1, 2020 by -

Electroswitch pushbutton switches exceed industry standards for reliability and performance. Our pushbuttons feature a variety of contact mechanisms, circuitry, mounting, and termination options. A complete selection of IP-rated, illuminated, and value-add configurations are available. Certifications include UL, CSA & VDE

Available in

  • Ultraminiature
  • Miniature
  • Standard
  • Sealed

Features

  • Multiple Circuit Configurations
  • Custom Actuators
  • Illumination
  • Multiple Terminal Options