Posted on March 2, 2021 by Jeff -
Manufactured from Stainless Steel, Bulgin’s extensive range of vandal-resistant security switches are designed with high resistance to wear and tear, corrosion, and harsh use in potentially hostile environments such as access control applications.
The front and rear panel mounted versions have three profiles: prominent, domed, and low profile—with a choice of switching and IP66 & IP68 front panel sealing that combined together to meet the ergonomic, electrical, and environmental demands of switch panel design. New additions of Black Anodised Ally as well as Stainless Steel are now available—and where the ultimate strength of steel is not needed, there is a brass, chrome-plated alternative. Low-profile style switches are also now available with a latching, push on/push off action.
The illuminated versions are available in dot and ring LED indications and a variety of illumination colors including bicolor LEDs. Newer versions also feature LED illumination driven by 6V, 12V & 24V together with rear panel sealing. These options will add that extra dimension to control panel layouts and functionality.
Switch Types
- Pushbutton
- Vandal Resistant
- Piezo
- Slide
- Toggle
- Rocker
Posted on September 22, 2020 by Jeff -
- Versatile miniature snap switch
- High level of repeat accuracy & contact stability
- Switching current 0.1 to 21 A at 250 VAC
- Wide variety of auxiliary actuators and terminal options
- Housing material PA 6 (T85 versions, colour black*) & PET (T125 & T150 versions, colour beige)
- Fulfills requirements of IEC 603351: GWFI at 850 °C, GWIT at 775 °C & GWT 750 °C
- Ambient temperature -40 to max. +150 °C
- Approved according to IEC 61058-1 / UL 61058-1 (T85 versions) & IEC 61058 and UL 1054 (T125 & T150 versions)
- Cadmium-free contact materials
- Halogen-free plastic material (T85 versions)
- Degree of protection IP40
Click here for a datasheet.
Posted on September 22, 2020 by Jeff -
- Robust standard switch for industrial applications
- 3 current ratings, up to 25 A
- Wide variety of auxiliary actuators available
- 3 terminal types (optional screw terminals available)
- 3 contact configurations
- High-temperature 150 °C (200 °C on request)
- Long-life coil spring mechanism
Click here for a datasheet.
Posted on September 22, 2020 by Jeff -
- IP67 subminiature switch with high repeat accuracy
- Switching Current 0.1 A to 10 A AC (model dependent)
- Wide variety of auxiliary actuators
- Actuators can also be retrofitted
- High contact stability due to specific contact materials
- Ambient temperature -40 to max. +120 °C
- Mechanical life min. 1,000,000 operations
- Approved according to EN 61058 and UL 1054
- Silicon-free version available
Click here for a datasheet.
Posted on September 22, 2020 by Jeff -
- Single-pole panel mount pushbutton switch
- Momentary, Push-Pull (reset), and Cheat Interlock versions
- Long-life coil spring, snap-action mechanism
- Agency-approved extended-life versions available
- VDE approval available on select models (F Series)
- Snap-in panel mounting
Click here for a datasheet.
Posted on August 13, 2020 by Jeff -
Features
- Vandal Proof / Vandal Resistant
- IP67 Sealing Degree
- 19mm
- Center Dot or Ring Illuminated
Momentary in function, the AH Series is 19mm in size with a single-pole, single-throw function. IP67 sealing degree with stainless steel body, the flush actuator is red LED ring illuminated. The LED voltage is 12VDC.
Specifications: The electrical rating of the AH Series is 1A at 24VDC/125VAC or 0.5A at 250VAC. The sealing degree is IP67. Electrical life is 50,000 cycles with contact resistance of less than 50 milliohms. Dielectric strength is 2,000Vrms between contacts and contact to LED. Insulation resistance is greater than 100 milliohms. The actuation force is 550 ± 50gF actuator travel of 2.5 ± 0.3mm. Operating and storage temperature is -25°C to 70°C. Materials: The actuator and threaded body are stainless steel or anodized aluminum with an inner switch body of polycarbonate and terminal support of PBT. The LED lens is polycarbonate with silver alloy contacts and tin-plated brass terminals. One hex nut and one “O” ring are supplied with each switch.
Posted on August 13, 2020 by Jeff -
Features
- Vandal Proof / Vandal Resistant
- UL / cUL Approved
- IP67 Sealing Degree
- 19mm
- Center Dot or Ring Illumination
The UL/cUL-approved AHU is IP67, 19mm in size, the AHU is available momentary or latching. The flush actuator can be nonilluminated, or bicolor ring or dot illuminated. Also available is an illuminated universal standby symbol. LED color options include red, yellow, green, blue, and white. LED voltage ranges from 6VDC to 220VAC.
Specifications: The electrical rating of the AHU Series is 3A at 125VDC or 3A at 250VAC. The sealing degree is IP67. Electrical life is 50,000 cycles with mechanical life of 1,000,000 momentary and 500,000 cycles latching. Contact resistance of less than 50 milliohms. Dielectric strength is 2,000Vrms between contacts. Insulation resistance is greater than 1,000 milliohms at 500VDC. The actuation force is 200 ± 50gF for SPDT and 250 ± 50gF for SPDT with actuator travel of 3.2 ± 0.25mm. Operating and storage temperature is -20°C to 65°C. Materials: The actuator and threaded body are stainless steel or anodized aluminum with an inner switch body and terminal support of PBT. The LED lens is polycarbonate with silver-plated copper alloy contacts and terminals. One hex nut and one “O” ring are supplied with each switch.
Posted on August 13, 2020 by Jeff -
Features
- Vandal Proof / Vandal Resistant
- IP67 Sealing Degree
- 22mm, 25mm, 28mm or 30mm
- Center Dot or Ring Illumination
- International Standby Symbol Option
- Mushroom-Style Actuator Option
Offering size options of 22m, 25mm, 28mm, and 30mm standard, the DH Series is both vandal- and splash-resistant. This panel mount switch is heavy duty and rugged in construction. The DH Series is available as momentary or latching in both SPST and DPST, normally open and normally closed. Flush actuator styles offer nonilluminated, bicolor ring, or dot illumination. Mushroom-style actuators are available in red anodized aluminum in both dot illuminated and nonilluminated. Illumination color choices are red, yellow, green, blue, white, and orange. LED voltage choices range from 6V to 220V. The DH Series latching or momentary pushbutton switch is also available with UV protection to resist fading. See the DH40 Series for an even larger version of this antivandal switch.
Specifications: The electrical rating of the DH series is 2A at 24 or 125VAC and 1A at 250VAC. Sealing is IP67. Electrical life is 50,000 cycles with contact resistance of less than 50 milliohms. Dielectric strength is 2000Vrms contact to contact and 2000Vrms contact to LED. Insulation resistance is greater than 100 milliohms. The actuation force is 550 ± 50gF with actuator travel of 2.5 ± 0.3mm. Operating and storage temperature is -25°C to 70°C. Materials: The actuator is stainless steel or black anodized aluminum with a polycarbonate LED lens. The threaded body is stainless steel or black anodized aluminum with an inner switch body of polycarbonate. Terminal support is polybutylene terephthalate with silver alloy contacts and epoxy-sealed brass terminals. One hex nut and one “O” ring are supplied with each switch.
Posted on August 13, 2020 by Jeff -
Features
- Vandal Proof / Vandal Resistant
- IP67 Sealing Degree
- 22mm, 25mm, 28mm, or 30mm
- Center Dot or Ring Illumination
- International Standby Symbol Option
- Mushroom-Style Actuator Option
The DH22U Series antivandal switch is our UL-approved version of the DH Series. Currently only available as a 22mm switch, the DH22U is IP67 vandal- and splash-resistant. Available in both momentary and latching with a flush ring illuminated actuator, the DH22U has body finish options of stainless steel or black anodized aluminum. LED voltage ranges from 6VDC to 220VAC. LED color options are red, yellow, green, blue, and white.
Specifications: The electrical rating of the DH22U Series is 3A at 125VDC or 3A at 250VAC. The sealing degree is IP67. Electrical life is 50,000 cycles with contact resistance of less than 50 milliohms. Dielectric strength is 2,000Vrms between contacts. Insulation resistance is greater than 100 milliohms. The actuation force is 200 ± 50gF for SPDT and 250 ± 50gF for SPDT with actuator travel of 3.2 ± 0.25mm. Operating and storage temperature is -20°C to 55°C. Materials: The actuator and threaded body are stainless steel or anodized aluminum with an inner switch body and terminal support of PBT. The LED lens is polycarbonate with silver-plated copper alloy contacts and terminals. One hex nut and one “O” ring are supplied with each switch.
Posted on August 10, 2020 by Jeff -
CIT Relay & Switch manufacturers electromechanical relays and switches, along with our Picker Components branded solid-state relays. Wherever opportunities arise, CIT works to provide the best product for the application and the most compelling support experience. Through paramount service, selection, quality, and value—we strive to be the best. CIT places the customer first. We work with our customers on simple to complicated projects, tailoring custom solutions and designs. Our technical, engineering, and customer support personnel are well-trained and can help with your design selection requirements. With a state-of-the-art test lab, CIT can address custom or standard test requirements under a variety of conditions to validate your application. From small to large projects, we are here to help with all our customers’ testing and design needs.
Recent Comments