Posted on August 10, 2020 by Jeff -
Features & Benefits
- New, wider selection of nozzle configurations
- Large, easy-to-read display that includes a vacuum level indicator
- Three (3) user-programmable presets
- Password lockout to prevent any unauthorized changes to the system operation or setup
- Vacuum system with .02 second delay timer to prevent nozzle clogging
- Easy-access solder collection chamber that is simple to clean
- Easy-to-change heater cartridge with American Hakko composite ceramic technology
- Independent nozzle which provides a low cost of operation
Posted on August 10, 2020 by Jeff -
This SPST-NO relay supports high-current applications with high-capacity load ratings. The high-capacity characteristic makes the G7EB ideal for PV inverters/power conditioners and industrial inverters as well as UPS systems. This high-power relay reduces the necessity for complex temperature designs and the inclusion of heat transfer devices due to low contact resistance as compared to similar relays.
Applications
- C&I PV Inverter
- Industrial Online UPS
- Industrial Inverters
Posted on August 10, 2020 by Jeff -
The new EDC and EDS series of Coin Cell-style EDLC capacitors from Cornell Dubilier (CDE) can replace or extend battery life in onboard memory backup. With quick response and recharge times, these devices offer higher power than batteries and greater energy than typical aluminum electrolytic capacitors without degradation over millions of charge-discharge cycles.
Both series offer values from 0.047 to 1.5 Farad capacity, at voltages up to 6.3 WVDC for the EDC series; and 5.5 WVDC for the EDS series. The operating temperature for the EDS series is from -25 °C to +85 °C, with the EDC series offering -25 °C to +70 °C. Three case configurations are available for horizontal, vertical, and radial-lead PCB mounting.
EDC and EDS series capacitors are ready to board mount in such applications as real-time clock (RTC) backup, power failure backup, battery assist and in market segments such as smart metering, HVAC controls, building automation, communication systems, appliances, instruments, and other microprocessor-based devices. Because of their high volumetric power density, they can be an effective way to reduce board size and weight. Either series can be used as a drop-in replacement for similar-value capacitors recently discontinued by other manufacturers. Lead times are less than 12 weeks with popular values in stock.
Highlights
- Long life
- High discharge currents
- 70 ºC (EDC) or -85 ºC (EDS) operating temperature
Applications
- Onboard memory backup circuits
- Audio output circuits
- Energy/Lighting
- Smart utility meters (AMR)
- Solar lights and energy storage
- Power conversion
- IoT-Energy harvesting/storage
- Industrial controls
- Telematics
Posted on August 10, 2020 by Jeff -
The V19, Honeywell’s unsealed MICROSWITCH family, provides a cost-conscious switching solution to assist in hitting overall system-level cost and design goals in high-volume applications. The V19 switch provides a fully certified, reliable, and repeatable solution over the lifetime of the product. RAST 2.5, 5, and 7 termination styles available for automated manufacturing requirements.
Features
- Configurable for amperage, circuitry, levers, terminals, and operation force
- Worldwide certifications & compliances (RoHS, REACH, UL, ENEC, CQC)
- Certified Mechanical Life: 500k || Certified Electrical Life: 10k
- Cost-optimized snap-action switch design
- RAST connection options for automated production
Applications
- Large Consumer Appliances (Washer, Dryer, Oven, Range, Refrigerator, etc.)
- HVAC
- Water Dispensers
- Coffee Makers
- Food Processors
- Microwave Ovens
- Cookers (Pressure & Rice)
Posted on August 10, 2020 by Jeff -
The EC series for PCB is a compact emergency stop switch with a panel cut-out of 22 mm. It is the market’s first PCB-mounted emergency stop switch that guarantees a high safety level, thanks to an extra locking ring that keeps the 2 parts together to avoid a floating mount. This high-level feature satisfies a critical need in many applications, especially those that need a compact e-stop solution with easy PCB installation.
Features
- Compact
- Resist to vibration
- UL qualified
- 2 poles for additional safety
- PCB mounting
Click here for a datasheet.
Posted on August 3, 2020 by Jeff -
Astrodyne TDI offers a broad range of standard off-the-shelf power entry/outlet EMI filters and power entry modules. Modules include the EMI filter as well as a fuse holder (single or dual) and/or a switch.
Easy to install and use, the filters are ideal for industrial and commercial electronics that require EMI/RFI protection, including computers, communications equipment, LCD TVs, toys, and sports and fitness equipment.
Our power entry EMI filters and power entry module carry US (UL), Canadian (cUL/CSA), and European (IEC/VDE/Semko) agency approvals and are available in both general purpose and low leakage current medical versions. At our agency-approved “in-house” test facility, US, Canadian, and/or European safety approvals can be obtained quickly and cost effectively on any of our customized and custom product, if needed.
Posted on August 3, 2020 by Jeff -
Astrodyne has over two decades of experience in design, development, and manufacturing of a complete range of AC and DC EMI/ RFI/ EMC filters for military and aerospace applications.
Our standard line of Military EMI Filters provides off-the-shelf performance for MIL-STD-461 and RTCA/DO-160 applications. Our standard offerings are also complemented by a diverse capability to design and build customized and custom filters and configurations. Most MIL-COTS EMI filters are designed for ambient temperatures of -40°C to +70°C (-40°F to +158°F) and operate in this range without any derating. Some of our single-phase rugged COTS EMI filters are designed for an extended ambient temperature of -40°C to +80°C (-40°F to +176°F). All Military EMI Filters have operating temperate ranges up to 100°C (212°F) and storage temperatures down to -55°C (-131°F).
Posted on August 3, 2020 by Jeff -
When your application requires an externally located power source, Astrodyne TDI’s desktop or wall mount power adapters are available in power ratings from 10 watts to 300 watts to meet your design requirements. Available in single, dual, and triple output configurations from 2.5-54VDC, these adapters feature auto-switching universal inputs and full safety agency certifications for both Medical and Commercial applications. Astrodyne has also expanded its line of desktop supplies to include CEC and Energy Star-compliant models for low no-load power consumption.
All Desktop versions feature either a universal IEC-320 style AC input connector or molded power cable, while the wall mount versions feature integral molded power plug connections. All models are available with a variety of output connectors, including coax and multipin DIN styles, and are an ideal choice for existing or new product designs.
Features
- Universal AC Input of 90-264VAC
- Full Safety Approvals
- EMI/RFI Meets VDE/FCC Part 15B
- Overcurrent and OVP Protection
Posted on August 3, 2020 by Jeff -
For industrial, instrumentation, medical, and numerous other applications requiring 5 Watts to 450 Watts, Astrodyne TDI’s open frame switching supplies offer the most flexible OEM solution. All models provide universal AC input and full safety agency certifications. Models include industry-standard footprint versions for conventional design needs. Open Frame products are available from 3.3VDC to 54VDC in single, dual, or triple output configurations.
Features
- 90 – 264VAC Universal Wide Range Input
- Full Agency Approvals – UL, TUV and CE Mark
- Integral EMI Filtering
- OVP and Overcurrent Protection
Posted on August 3, 2020 by Jeff -
The Mercury line of industrial supplies from TDI Power is a series of AC/DC and DC/DC modules that are building blocks for reliable power solutions to suit a wide range of applications in the industrial market.
Mercury AC/DC rectifiers and DC/DC modules are available in three different mechanical package sizes and output power levels including 800W, 1200W, 2700W, 3800W, and 4300W. Using a mechanical design that separates the power module from a hard-wired connection shelf assembly, hot swapping of individual units is made simple. This is beneficial when paralleling large numbers of modules for redundancy or if flexibility for expansion is required.
With flexible input voltage ranges, high power, and wide modularity capabilities, the Mercury family is an ideal choice for distributed power architectures and standby battery systems. Through TDI’s 50+ years of experience in power electronics and our proprietary Highly Accelerated Stress Screening (HASS) processes, customers can expect years of performance with high MTBF and low MTTR. Rely on TDI Power for your next project that mandates reliable, accurate, and flexible power.
Features
- 90-275VAC 1 phase
- 180-VAC 3Ph Shelf Options
- 380-480VAC 3PH Shelf Options
- Air Cooled
- Programmable
Recent Comments