Posted on February 10, 2025 by Jeff -
World’s first 100% integrated industrial autonomous wheel. With the ez-Wheel Assist Wheel Drive 150 series, up to 1,000 kg of loads can be easily transported within a facility for the Materials Handling industry. Using Assist Wheel Drive reduces workers’ musculoskeletal disorders and stress, and improves safety and ergonomics. Assist Wheel Drive is easy to install and deploy.
Features
- World’s first 100% integrated industrial autonomous wheel
- Easily equipped onto any existing moving trolley to ease the transport of heavy loads
- Improve efficiency and productivity
- Comply with ISO 11228-2: International standards for ergonomics
- Maximum payload of 1000 Kg (over 2000 lbs)
- Less stress and reduced musculoskeletal disorders
- Ideal solution to address workers’ safety and ergonomic work conditions
- Easy setup and installation
- Less than one year return on investment
Click here for a catalog.
Posted on February 10, 2025 by Jeff -
FC Series Supercapacitors, also known as Electric Double-Layer Capacitors (EDLCs), are surface mount-type components intended for high-energy storage applications. The FC Series is designed specifically for reflow soldering, allowing them to be attached to a printed circuit board (PCB) directly. This FCR type is a surface mount supercapacitor with an operating temperature range of 85°C in high-temperature environments.
Benefits
- Surface mount without holder
- Wide range of temperature from −40°C to +85°C
- Up to 2,000hr at 85°C operational life
- Maintenance-free
- Maximum operating voltages of 5.5 VDC
- Highly reliable against liquid leakage
- Lead-free and RoHS Compliant
Applications
Supercapacitors have characteristics ranging from traditional capacitors and batteries. As a result, supercapacitors can be used like a secondary battery when applied in a DC circuit. These devices are best suited for use in low-voltage DC hold-up applications such as embedded microprocessor systems with flash memory
Click here for a datasheet.
Posted on February 10, 2025 by Jeff -
Type QAS will extend the operating life of electronic and electromechanical devices by reducing and/or eliminating electrical arcing, noise, and EMF. These electrical conditions often cause early failures in relays, switch contacts, and solid-state components such as SCRs and TRIACs.
Features
- Noise and arc suppression
- RC Snubber Network
- Relay contact protection
- Noise reduction on controllers and drives
- EMI/RFI reduction
- dv/dt suppression
- Coated with flame-retardant epoxy
Applications
- Reduce arcing and noise generated and produced in switches, mechanical relays, and solid-state devices
Click here for a datasheet.
Posted on February 10, 2025 by Jeff -
Samtec’s next generation of RF coaxial cable offers improved stability with flexure over time. The coaxial structure—with an outer jacket colored in distinctive Samtec orange—is designed to meet increased demands placed on the aerospace, defense, datacom, computer/semiconductor, and instrumentation markets. Performance is optimized at frequencies beyond traditional industry targets to support emerging applications.
Features
- Nitrowave™ cable technology in distinctive Samtec orange
- Phase and amplitude stable with flexure
- Consistent contact resistance between layers
- Lower-density dielectric minimizes loss
- State-of-the-art shielding techniques and interlayer
- Silver plating enhancements mitigate corrosion potential
- Electrical performance optimized at next-gen frequencies (GHz): 18, 32, 43.5, 71, 95, 110
- Mechanical and environmental robustness
- Phase vs. Bending = < 0.2° x F (GHz)
- VSWR = 1.4:1 @ 43.5 GHz (LL043 Series)
Applications
- Test and measurement
- 5G datacom
- Defense/aerospace
- Computer/semiconductor
Click here for a datasheet.
Posted on February 10, 2025 by Jeff -
D2EW, which can be operated from multiple angles, is an ultra-subminiature switch that can be easily integrated into small available spaces. This switch eliminates the need for a lever, improving its cost performance and increasing its flexibility in customer unit design. Downsizing the switch operating mechanism ensures a reduction in materials used, component count, design man-hours, and production man-hours.
Features
- The industry’s smallest class *(8.3 x 7.0 x 5.3 mm) D2GW equivalent size
- A left-right asymmetrical post shape prevents misassembly
- A sliding contact structure delivers quiet operation
- Contributes to energy saving (minimum applicable load 50 µA
*Based on OMRON investigation in August 2024
Click here for a datasheet.
Posted on February 10, 2025 by Jeff -
These devices are developed using a charge compensation principle and proprietary process technology, resulting in Power MOSFETs with significantly reduced resistance RDS(on) and gate charge Qg. A low on-state resistance reduces the conduction losses; it also lowers the energy stored in the output capacitance, minimizing the switching losses. A low gate charge results in higher efficiency at light loads as well as lower gate drive requirements. In addition, these MOSFETs are avalanche rated and exhibit a superior dv/dt performance. Also due to the positive temperature coefficient of their on-state resistance, they can be operated in parallel to meet higher current requirements.
Features
- Low on-resistance RDS(on) and gate charge Qg
- dv/dt ruggedness
- Avalanche capability
- International standard packages
Benefits
- Low conduction losses
- Minimized parallel connection effort
- Simplified driver design with minimal driver losses
- Simplified thermal design
- Increased power density
Applications
- Synchronous rectification in switching
- Power supplies
- Motor control (48V-80V systems)
- DC-DC converters
- Uninterruptible power supplies
- Electric forklifts
- Class-D audio amplifiers
- Telecom systems
- Battery energy storage systems (BESS)
- Battery chargers
- Battery formation
- DC/battery load switch
Posted on February 4, 2025 by Jeff -
NKK’s MRK Series Rotaries combine a low-profile design with positive detent mechanism for a distinct feel and audible feedback.
- IP67 Rating: At the front panel, making cleaning easy.
- Rigorous: Ideal for hygiene-critical applications, withstanding temperatures from 14°F to 158°F.
- Self-Cleaning: Gold-plated contacts reduce electrical resistance, prevents oxidation ensuring high contact reliability.
- Adjustable: Stopper plate allows 2-12 position settings.
Applications
- Packaging Machinery
- Ingredient Dispensing Systems
- Beverage Dispensing Systems
- Cooking & Baking Equipment
- Cleaning & Sterilization Systems
Posted on January 27, 2025 by Jeff -
Metal pushbutton with switching voltage up to 250 VAC and indicator elements with different illumination surfaces.
Description
- Indicator elements in identical design as pushbuttons
- Mechanical switch with stroke MO (Momentary)
- With or without illumination
- With torsion protection for easier positioning
- Equipped with quick-connect terminals to permit fast connection
Unique Selling Proposition
- Attractive tactile feedback
- High-quality materials
- Long life span
- Color making and a variety of design options regarding size, color, and illumination
Characteristics
- Housing material in stainless steel
- Actuator in stainless steel or ceramic
- Housing and actuator material of the ring-illuminated RD version in black anodized aluminum
- Switching voltage from 30 VDC to 250 VAC
- Switching current from 0.1 A to 10 A, with gold 100mA
- All laser-marked, ring-illuminated, and point-illuminated versions have anti-rotation protection for easy mounting
Posted on January 20, 2025 by Jeff -
As an Automotive Tier 1 Antenna Supplier, Yokowo has a long history of designing and manufacturing high-performance compact, high-quality GNSS Antennas. Utilizing this same expertise, we are now developing and supplying antennas for precision location positioning applications for L1 bands and major GNSS bands such as GPS, QZSS, GLONASS, Galileo, and BeiDou, as well as L1/L2, L1/L5, and L1/L2/L5/L6 bands.
Features
- IP67 rating
- Compact size (H22.7mm x W56.4mm x D64.4mm) while achieving reception performance comparable to larger surveying antennas
- Three variations available in the same housing size: L1/L2, L1/L5, L1/L2/L5/L6 + L-Band
- Standard specifications include SMA connector and 5m cable length
- Three mounting options: double-sided tape, magnet, and screw mount
Benefits
- Flexible delivery options: Unpacked delivery available based on application needs
- Customizable: Cable Length and connector type can be customized
- Expert consulting: Optimal antenna consulting using our own Anechoic Chamber and Simulator
Applications
- Autonomous Driving
- Autonomous Agricultural Machinery
- Self-Driving Construction Machinery
- Drones, Unmanned Mobility
- High-Precision Surveying
- Time Synchronization
Click here for a datasheet on the antenna with L1/L2 band coverage.
Click here for a datasheet on the antenna with L1/L5 band coverage.
Click here for a datasheet on the antenna with L-band and full-band (L1, L2, L5, L6) coverage.
Posted on January 20, 2025 by Jeff -
This Yokowo antenna design and style has a long history of reliability and has been used extensively in the automotive industry. It is applicable to GPS, GLONASS, and Galileo applications.
- Applicable Satellites: GPS, QZSS, Galileo, GLONASS, BeiDou
- Frequency: L1
- Dimensions: 35.5 x 30.4 x 11.7 mm
- Cable Length: 5,000 mm
- Connector: SMA (Male)
- Installation: Magnet/Double-Sided Tape
- Water & Dust Resistance Grade: Per JIS D0203 S2
Applications
- Positioning for Agricultural Machinery, Construction Equipment, Drones, etc.
- Time Synchronization for Base Station and IoT Gateways
Click here for a datasheet.
Recent Comments