Posted on July 1, 2020 by Jeff -
The XD Series joystick is a multiaxis Hand Grip controller specifically engineered for demanding vehicle applications.
Featuring non-contacting Hall effect technology to provide up to 10 million operations, the XD series is a compact yet highly reliable joystick ideally suited for off-highway vehicles and machinery. The XD series measures just 60mm below panel, yet withstands horizontal loads up to 400 lbf. utilizing an all-metal construction. The XD handle utilizes a unibody construction with modular inserts to provide design flexibility. Inserts include an index trigger switch, operator presence paddle, and customizable faceplate, and enable IP67 above panel environmental sealing against the ingress of dust and liquids.
Features
- SIL 2 compatible – Redundant Hall sensors
- Resists high axial load (1780 N – 400 lbf)
- Shallow mounting depth of <60 mm (2.36)
- Rated for 10 million lifecycles
- SAE CAN bus J1939-71
Posted on June 30, 2020 by Jeff -
The IX4426, IX4427, and IX4428 are dual high-speed, low-side gate drivers. Each of the two outputs can source and sink 1.5A of peak current with rise and fall times of less than 10ns. The inputs of each driver are TTL and CMOS compatible and are virtually immune to latch-up. Low propagation delay times and fast, matched rise and fall times make the IX4426, IX4427, and IX4428 ideal for high-frequency and high-power applications.
The IX4426 is configured as a dual inverting driver; the IX4427 is configured as a dual noninverting driver; and the IX4428 is configured with one inverting driver and one noninverting driver. All three devices are available in a standard eight-pin SOIC package (N suffix) and an eight-pin DFN package (M suffix).
Features
- 1.5A Peak Output Current
- Wide Operating Voltage Range: 4.5V to 35V
- -40°C to +125°C Operating Temperature Range
- Latch-up Protected to 1.5A
- TTL- and CMOS-Compatible Inputs
- Fast Rise and Fall Times
- Low Power Consumption
Applications
- MOSFET Driver
- Switching Power Supplies
- Motor Controls
- DC-to-DC Converters
- Pulse Transformer Driver
Click here for a datasheet.
Posted on June 30, 2020 by Jeff -
The IX4351NE is designed specifically to drive SiC MOSFETs and high-power IGBTs. Separate 9A source and sink outputs allow for tailored turn-on and turn-off timing while minimizing switching losses. An internal negative charge regulator provides a selectable negative gate drive bias for improved dV/dt immunity and faster turn-off.
Desaturation detection circuitry detects an overcurrent condition of the SiC MOSFET and initiates a soft turn-off, thus preventing a potentially damaging dV/dt event. The logic input is TTL and CMOS compatible; this input does not need to be level shifted even with a negative gate drive bias voltage. Protection features include UVLO and thermal shutdown detection. An open drain FAULT output signals a fault condition to the microcontroller.
The IX4351NE is rated for an operational temperature range of -40°C to +125°C and is available in a thermally enhanced 16-pin power SOIC package.
Posted on June 30, 2020 by Jeff -
IX9907 is a quasi-resonant controller optimized for phase-cut dimmable, off-line LED applications. Precise PWM generation supports phase-cut dimming and power factor correction.
IX9907 incorporates an internal 650V power MOSFET. It has a wide voltage operating range and low power consumption. Multiple safety features ensure full system protection under fault conditions. With its strong feature set and low cost, the IX9907 is an excellent choice for quasi-resonant, off-line flyback LED bulb designs.
- Internal 650V, 2-Ohm power MOSFET
- Single stage, primary control with PFC and dimming features
- >90% efficiency
- Power factor >98%
- Wide operating voltage range
- Digital soft-start
- Foldback correction and cycle-by-cycle peak current control
- Output overcurrent and overvoltage protection
- Overtemperature protection
- Undervoltage lockout
Posted on June 30, 2020 by Jeff -
The DSV28 series solenoid valves from Deltrol Controls are small two-way solenoid valves used to control the flow of liquids, steam, and inert gases up to 150 psi. Materials used to construct these valves allow them to be used in applications with wide-ranging temperature, pressure, flow rate, and connection requirements. Robust nonmetallic valve body design provides competitive pricing and superior performance.
Features
- Normally open and normally closed configurations
- DC and AC (rectified or shaded pole) coils
- Class F and Class H coil insulation systems
- Media temperatures up to 284 degrees F
- Direct acting pressure ratings 0 – 150 PSI
- Push to connect, barb, and compression inlet/outlet connections
- Wet parts constructed with the highest level of corrosion-resistant stainless steel
- Polysulfone, polyphenylsulfone, and nylon body materials
- UL and NSF certification
Applications
- Beverage machines
- Vending machines
- Steam cooking equipment
- Welding equipment
- Water purification equipment
- Medical equipment
- Potable water dispensing
- Pressure venting applications
Deltrol Controls manufactures several different types of valves, linear solenoids, and electromechanical relays. Please visit our website or contact a sales representative for assistance.
Posted on June 26, 2020 by Jeff -
This Patent Pending design is revolutionary to the AC fan industry. Designed to simply replace your current fan cord, no additional wiring, circuit boards, control boxes, or design changes are required. The GardTec Green Fan Cord will automatically turn your AC cooling fan on when the system heat rises, then turn it off when the system heat drops, allowing the fan to run only during those times when the system calls for additional cooling. Save energy and costs, reduce fan-generated noise, and increase product life.
Easy Installation, Plug in the Fan and Go… Controlling the internal ambient temperature of applications is critical to the proper functioning and life expectancy.
Posted on June 17, 2020 by Jeff -
Taiwan Semiconductor (TSC) holds a leadership position in the diode and rectifier market with a wide range of products from standard, fast, ultrafast, superfast recovery, TVS-transient voltage protection, Zener Schottky, trench Schottky, and more. Rectifiers are offered in a wide range of industry-standard surface mounts as well as through-hole packages. Upgraded alternatives to a wide range of commonly used devices are available. Many rectifiers are offered in AEC-Q automotive-qualified versions, however, all products have sub-4 parts per billion quality levels. Applications of TSC rectifier and diode products include industrial, telecom-datacom, consumer electronics, general-purpose power supply and power conversion, automotive electronics, and more. Rectifier diodes are available from tens of milliamps to tens of amps at a wide range of voltage ranges and technologies. TSC products offer automotive quality and service levels without compromise supported by a global footprint of manufacturing and customer service.
Posted on June 17, 2020 by Jeff -
Taiwan Semiconductor (TSC) has a rich legacy in the bridge rectifier market starting in 1979 as their first product offering. Today building on over 40 Years of Technology, Manufacturing, and Global Supply Chain Expertise the bridge rectifier offering has expanded to include a wide range of offerings. Taiwan Semiconductor has maintained a leadership position in this market, staying at the forefront of packaging innovation. The product offering now ranges from auto-insertable bridge rectifiers at 800 mA to 50+ amp parts and everything in between. Bridge rectifiers are offered in AEC-Q automotive-qualified versions, however, all products have sub-4 parts per billion quality levels. All TSC bridge rectifiers are UL recognized for safety and compliance and meet all the current necessary environmental disclosure requirements for WEEE, RoHs, UL flammability classification ratings- 94V-0, and more. The ABS package offers automated placement for high-volume manufacturing applications in industrial, telecom-datacom, consumer electronics, power supply and power conversion, automotive, and all general-purpose rectification requirements. The ABS family has a wide range of voltages, reverse recovery time options, glass passivated construction, and more. TSC products offer automotive quality and service levels without compromise.
Posted on June 4, 2020 by Jeff -
Kingbright’s RGB+IC is an addressable intelligent control LED in a PLCC-6 package with an integrated control circuit for complete control of each pixel. The data protocol uses a unipolar NRZ communication code that enables a simple circuit, small size, and convenient installation.
The control circuit and the LED share the same power source with a built-in electric reset and power lost reset circuit. Our RGB+IC SMD LED can achieve 256-level grayscale with each color being controlled individually. Kingbright RGB+IC is ideal for decorative and entertainment lighting applications, full-color soft light strips, commercial and residential architectural lighting, signage applications, etc. Kingbright RGB+IC PLCC-6 package accomplishes a higher moisture-sensitivity level rating at MSL 3 to provide more durability and flexibility to the customer’s design and production.
Features
- Addressable intelligent control PLCC-6 package with integrated control circuit for complete control of each pixel
- Intelligent protection against reverse connection
- Built-in electric reset and power lost reset circuit
- 256-level grayscale adjustable circuit
- Built-in signal reshaping circuit
- Cascade port transmission signal by single line
- Moisture sensitivity level: 3
- RoHS compliant, halogen-free
Applications
- Decorative and entertainment lighting
- Full-color module and LED light strip
- Commercial and residential architectural lighting
- Signage applications
Posted on May 26, 2020 by Jeff -
Features
- Small Size and Light Weight
- Low Current Consumption
- High Sound Output
- Extremely clear and penetrating sound
- Sound level from 75dB to 95dB
- Mounting Methods:
- Direct Mount – wires
- Flange
- Panel- Flat Blade
- Panel – Screw Terminal
- PC Pins
- Surface Mount
- Just add voltage to start alarm
Recent Comments