Posted on January 15, 2020 by Jeff -
NIC NPX series of radial leaded metallized polypropylene film capacitors, multiple safety agency-approved interference suppression capacitors with “X2” across-the-line (up to 310VAC) rating in a molded box construction.
The NPX Series features a wide capacitance range and improved safety over ceramic capacitor styles (Self-healing metalized film construction), providing low-cost EMI – noise suppression solution in a precision molded case.
Characteristics
- Temperature Ranges : -40°C ~ +100°C
- 310V Rating UL listing (310VAC)
- Capacitance Range 1,000pF ~ 1.0μF
- Tolerances: ±10% (K), ±20% (M)
Features & Advantages
- Metallized Polypropylene Film
- Noninductive & Self-Healing Construction
- Case meets UL-94V-0 Flammability
Applications
- Across AC Line
- EMI Suppression
- Power Management Circuits
- AC-DC Converters
- Inverters
- Voltage Doublers
- Telecommunications
- Audio & Video
- Radio/TV Equipment
Posted on January 15, 2020 by Jeff -
Three product series are included within the NPIS_L_ family of low-profile shielded power inductors. NPIS_L_ family utilizes automated component assembly processing resulting in ultrasmall low-profile case sizes with improved quality and higher current ratings than conventional construction power inductors in the same size. Noise reduction is improved by the use of resin-shielding material, making these power inductors the ideal choice for today’s improved efficient DC-DC converters.
-
- Twenty-three (23) case sizes ranging from 2mm x 1.6mm to 8.0mm x 8.0mm (LxW) with component heights ranging from 1.0mm to 4.5mm
- Inductance values range from 0.16uH ~ 330uH in ±20% (M) or ±30% (Y) inductance tolerances
- Isat up to 11A (NPIS_L), 7.8A (NPI_LP) and 13.8A (NPIS_LS)
- NPI_LP features lower DCR (up to 30% lower)
- -40°C ~ +125°C including self-heating (+40°C) temperature rise (+120°C limit for NPIS_L)
Applications
- Power Supplies
- Driver Circuits
- Point of Load
- DC-DC Converters
- LDO Regulators
- Battery Charging
- Communication
- Wireless
- Network Equipment
- Industrial Controls
- Lighting & Displays
- Appliances
- Point of Sale
- Security & Alarm
- IoT
Posted on January 15, 2020 by Jeff -
Low ohmic, precision current-sensing resistors. NCSR series uses temperature-stable precision conductor construction, and NCST uses low-cost thick-film construction. Supplied on tape and reel for automatic pick and placement. Precision resistance values from 0.5 milliohm (0.0005 ohm) to 1000 milliohm (1.0 ohm) are available in tolerances from +/-1% (F) ~ +/-5% (J). TCRs (resistance temperature coefficients) cover range from +/-50PPM/°C ~ +/-600PPM/°C. Industry-standard case sizes from 0402 ~ 2512 with power ratings of 0.050W (1/2W) to 3.0W. Wrap-around terminations with nickel barrier and tin finish are compatible with tin-lead and lead-free soldering processes.
Applications/Functions
- Current sensing
- POL converters
- LDO regulators
- VRMs
- Battery powered devices
- Circuit Protection
- Motor Controllers
- Switching Power Supplies
- Charger/Adapters
Posted on January 15, 2020 by Jeff -
The Davies functional handle series provides the ideal combination of ergonomics, productivity, and safety. With switch housing and functional elements, these components are suitable for applications where locks with interlocks are used. Control functions allow the user to carry out switching functions as required. Individual control functions can be implemented. Features may include emergency stops, labeled pushbuttons, and LED handle ledges.
Part Specifications May Include:
- Illuminating handle ledges. Green, yellow, and red LED lights used to display operating status of machine.
- Keypad used in combination with transponder or with integrated pneumatic valve.
- Emergency stop with variable NC/NO contacts and LED lights.
- Switch housing equipped with pushbuttons and/or emergency stop.
- Solenoid tumbler equipped with locking feature for sliding and hinged doors.
- Control functions can be customized to meet your specific needs.
Click here for a datasheet.
Posted on January 15, 2020 by Jeff -
Davies Molding has been providing electronic enclosures for over 50 years. Ideal for industrial and electronic applications, Davies plastic enclosures are the economical choice while remaining portable and durable. With offerings including Phenolic and ABS thermoplastic, there is sure to be a fit for any of your electronic casing needs.
Click here for a datasheet.
Posted on January 15, 2020 by Jeff -
The nylon body of Davies Molding cable glands provides excellent impact resistance and durability in harsh conditions at an economical price. They protect cabling, wiring, and tubing from abrasion while simultaneously protecting enclosures from elements such as water, dust, and debris.
- Supplied preassembled with locking nut, O-ring, body, seal, and sealing nut
- Cable Gland Material: Nylon UL94 V-2
- Sealing Elements Material: TPE Rubber
- Seal Rating: IP67
- Operating temperature: -30°C to 120°C Dynamic
Click here for a datasheet.
Posted on January 10, 2020 by Jeff -
Power Sonic’s PSL series of LiFePO4 batteries have been designed and developed to provide a lighter, higher power and longer life solution to lead acid batteries. LiFePO4 batteries last longer and can produce ten times the number of cycles than a typical lead acid battery. At only 40% of the weight of the equivalent lead acid battery, our LiFePO4 range is ideal for those applications that need to be lighter and more mobile but deliver the same power.
Features
- High-performance LiFePO4 battery
- Compact and only 40% of the weight of comparable lead acid battery
- Up to 10 times more cycles than lead acid batteries
- Faster charging and lower self-discharge
- Delivers twice the power of lead acid batteries, even high discharge rate, while maintaining high energy capacity
- Supersafe chemistry
- Rugged impact-resistant ABS case and cover flame retardant to UL94:V0
- PCM for balancing cells and protecting against overcurrent, overcharge, overdischarge, and short-circuit
- ISO9001:2015 – Quality management system
Applications
- Medical
- Transportation
- Sport and recreation
- Mobility
- Renewable energy
All Power Sonic batteries are subject to stringent quality controls through every step of the manufacturing process ensuring both consistency and reliability.
Posted on January 9, 2020 by Jeff -
Power Sonic’s PS series of sealed lead acid batteries have been manufactured utilizing Absorbent Glass Mat technology to deliver excellent performance and reliability. Ranging in voltage from 2V to 12V and a capacity range from 0.8Ah to 260Ah the PS series are ideal for a wide selection of general-purpose float standby and light cyclic applications.
Features
- Absorbent Glass Mat (AGM) technology for excellent performance
- Power and volume ratio yielding impressive energy density
- Valve-regulated, maintenance-free spill-proof construction
- Rugged impact-resistant ABS case and cover flame retardant to UL94:HB and UL94:V0
- Low self-discharge rate for long shelf life
- Gas recombination technology
- Approved for transport by air. DOT, IATA, FAA, and CAB certified
- UL recognized
- ISO9001:2015 – Quality management system
Applications
- General purpose
- Emergency lighting
- Fire & security
- Medical
- Toys
- UPS
All Power Sonic batteries are subject to stringent quality controls through every step of the manufacturing process ensuring both consistency and reliability.
Posted on January 9, 2020 by Jeff -
Power Sonic’s PS HD series are heavy-duty rechargeable sealed lead acid batteries with increased vibration resistance designed to deliver ultimate reliability in applications that may be subject to higher-than-normal vibrations. There are currently three 12V models available, a 9 ah, 18 ah, and 21 ah.
Features
- Absorbent Glass Mat (AGM) technology for excellent performance
- Power and volume ratio yielding impressive energy density
- Valve-regulated, maintenance-free spill-proof construction
- Rugged impact-resistant ABS case and cover
- Lower internal resistance
- Punch-plate design yielding ultralow impedance
- Approved for transport by air. DOT, IATA, FAA, and CAB certified
- UL recognized
- ISO9001:2015 – Quality management system
Applications
- Renewable energy
- Emergency lighting
- Fire & security
- Medical
- Toys
All Power Sonic batteries are subject to stringent quality controls through every step of the manufacturing process ensuring both consistency and reliability.
Posted on January 9, 2020 by Jeff -
Power Sonic’s PSH series of high-rate sealed lead acid batteries have been designed and engineered specifically for low-voltage UPS applications. Constructed to ensure constant, dependable power when used as battery backup or as part of a UPS system. Each 6V and 12V battery in our PSH series has a UL94:V0 flame-retardant case and cover.
Features
- Absorbent Glass Mat (AGM) technology for excellent performance
- Designed for high-rate discharge applications
- Valve-regulated, maintenance-free spill-proof construction
- Rugged impact-resistant UL94:V0 flame-retardant case and cover
- High-rate charge and discharge
- Exceptionally high energy density
- Approved for transport by air. DOT, IATA, FAA, and CAB certified
- UL recognized
- ISO9001:2015 – Quality management system
Applications
- UPS
- Data Center
- Fire & security
- Telecoms
All Power Sonic batteries are subject to stringent quality controls through every step of the manufacturing process ensuring both consistency and reliability.
Recent Comments