Product Type: Enclosures

Tem-Stat Temperature Control

  • Prevents shut-downs caused by over-heating of electronic or electrical equipment in enclosures
  • Reacts quickly to gradual or sudden temperature changes
  • Contacts close when temperature reaches designated setting
  • Temp-Stats can also be used for temperature control in convection and radiant heating applications
  • Flange mount
  • Contacts remain closed until there is a 10 F drop in temperature
  • UL and CSA Listed (File # E332047, model TS-15-A)
  • Service Life 100,000 cycles, Full Load
    • 120 VAC, 15 AMPS
  • Service Life 30,000 cycles, Full load
    • 240 VAC, 10 AMPS

IP67 Air and Moisture Vent

  • IP rated vent for plastic and metal enclosures
  • Breathable e-PTFE membrane keeps out water and dust
  • Rated IP67 (submersible)
  • Minimize the risk of gasket breach caused by changes in air pressure
  • Reduce condensation that may corrode electronic components
  • Body is made of corrosion-resistant UV-resistant polycarbonate plastic
  • Membrane is hydrophobic (water repellent) and oleophobic (low oil absorption)
  • Seals using O ring washer
  • Long, maintenance-free service life
  • M6*1.5 vent plug
  • 0.47 inches long x 0.55 inches diameter
  • Air flow 160ml/min @dp=70 mbar
  • Color: Gray
  • *1 pound per square inch equals 6.895 KPa or 68.9476 mbar
  • *About 0.0145 pounds per square inch equals 1 mbar (~0.015 psi)

NBB/NBF Series NEMA Box

NBB Series

The NBB Series of NEMA boxes is one of Bud’s most popular enclosures for wet, dirty and/or corrosive environments. They feature plastic latches and an all-plastic construction. Most of the gasketed enclosures in this series have been tested and approved to UL508-4x specifications, with a few being approved to UL50-4x. All NBB Series enclosures meet IEC529 IP66 requirements.

NBF Series

The NBF Series of NEMA boxes have plastic latches and hinges for an all-plastic construction. These gasketed enclosures meet NEMA 1, 2, 4 and 4x and IEC529-IP66 requirements, making them suitable for wet, dirty and/or corrosive environments. This versatile family includes indoor and outdoor versions, versions with clear covers, and an option for a padlockable steel latch. Depending on the model, they are made of ABS, ABS polycarbonate blend, or polycarbonate-PBT blend plastic. The NBF Series is suitable for many applications.

Custom Molded Cases

  • Platt’s Custom Molded Case solutions are the best-in-class for protecting, professionally presenting, and organizing your equipment.
  • Customized to your specific needs, these cases are ideal for computer, video, audio, medical, electronic instrumentation and industrial equipment.
  • Platt’s Engineering team is expert in designing your custom case, based on your requirements.
  • Build your custom case to fit any needs. Size, pockets, protection, color and portability requirements can all be customized.
  • Cases are available with built-in wheels and telescoping handle.
  • Foam interiors can be made to your individual requirements using any type of foam, including polyurethane foam, polyethylene foam, low abrasion, or anti-static foam.
  • Options include different colors, stacking studs, TSA accepted combination lock, wheels and telescoping handle, key lock, and padlock loops.
  • Brand the exterior of your case with custom aluminum nameplates or with a molded-in logo.
  • Platt is a distributor of Pelican cases, and can customize your Pelican case with custom foam, branding, sewn accessories and other work.

Sell Sheet

Custom Sewn Cases

  • Build your custom case to fit any needs. Size, pockets, protection, color and portability requirements can all be customized.
  • Combine the lighter weight and sharp appearance of a custom sewn case with the protection and organization of a custom foam insert.
  • Organize and protect your company’s tools with custom tool pallets and rolls – sewn specifically for your set of tools. These pallets can be used along with Platt’s extensive selection of tool cases.
  • Brand your case with your logo – high quality embroidery or silk screening are available.
  • Great for sales and marketing reps – professionally display your products to end customers, and protect those products on the road

Sell Sheet

Custom Foam

  • Platt’s custom-cut foam saves you time and provides the best in protection, professional presentation and organization for your project.
  • Platt is a full-fledged foam fabricator. Customize your foam insert for any case or any application to fit perfectly around your items.
  • Platt’s Engineering team is expert in designing your foam insert, based on your requirements.
  • Custom foam is available to use with any case, box or other application. Platt is your one-stop-shop for custom foam products, regardless of the application.
  • Waterjet foam cutting cuts precise dimensions which give you a beautifully cut piece of foam.
  • Many types of foam available, including polyurethane foam, polyethylene foam, low abrasion, or anti-static foam.
  • Brand or identify your items with foam overlays that include text or logos. Label your parts or products to ease identification and product promotion.
  • Add a velour topping to the foam for a more luxurious look to your insert.
  • Great for sales and marketing reps – professionally display your products to end customers, and protect those products on the road.

Sell Sheet

Heavy Duty Molded Shipping Cases

  • Heavy-duty cases, great for shipping, transporting and protecting your equipment.
  • Tested for vibrations, water resistance, tumbling and drops to meet ATA 300, category 1 specifications. Your equipment will be protected under the most difficult conditions!
  • Get superior protection and travel light with the tough impact-resistant HMW polyethylene exterior. Provides the best in high-impact strength, durability, crack resistance and chemical resistance.
  • Filled with cubed “Pick-n-Pluck” foam to configure for your needs, or have Platt customize foam for a perfect fit.
  • Heavy-duty aluminum rim and gasket, full-length piano hinge and spring-loaded handles are designed to withstand difficult shipping and transportation conditions.
  • Most cases include built-in TSA accepted combination lock to keep your case contents secure while traveling.
  • Most cases include wheels and telescoping handle for easy transportation.

Sell Sheet

1457 Series – Watertight Extruded Aluminum Enclosures

Key Features

  • Watertight – heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing.
  • Sized for standard Eurocards.
  • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
  • Rugged body constructed from one piece, extruded aluminum with a minimum thickness of .06” (1.5 mm).
  • Extruded aluminum body includes a recessed area for labels or membrane keypad.
  • End panels are rugged – yet easy to machine – diecast aluminum with full perimeter self-adhesive gaskets.
  • Designed to meet IP65.
  • Choice of two versions – end panels without flange or with flange (for shelf or wall mounting).

Includes:

  • Two diecast aluminum end panels – painted in a durable, black satin powder paint.
  • Extruded, aluminum body (choice of either clear anodized or black powder paint finish).
  • Two closed cell polyethylene foam – end plate gaskets & rubber “O” rings for assembly screws.
  • All hardware and self-adhesive feet.
  • Replacement assembly screws can be purchased in 100-packs under part number 1457MS100
  • NOTE: Recommended screw torque is 5 lbf/in

– Available with black powder coat or clear anodize finish and with or without wall-mounting flanges.

– Enclosure includes extruded body, die-cast end panels, gaskets, and hardware.  Extra end panel kits are sold separately.

– Built to be water-proof and very rugged.

1555F Series – Type 4X, 6P Enclosures

Features

  • Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls etc. etc.)
  • Ideally suited for mounting printed circuit boards, panels or DIN rail mounted components.
  • Designed for wall mounting.  Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper resistant screws).
  • Satin texture finish with smooth recessed surface on lid for a membrane keypad or label
  • Standoffs molded in the interior of the lid & enclosure – designed for #4 x 1/4” self tapping screws (our part number 1555TS100)
  • Choice of two materials:
    • General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use.
    • Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) – Recommended for outdoor use
  • Color is a light gray (RAL 7035) to help keep heat absorption down.
  • Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
  • Gasket is one piece made from high temperature, U.L. listed silicone.  Supplied loose inside the enclosure (not pre-installed).
  • Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68.
  • ABS Plastic versions are designed to meet IP66.
  • Polycarbonate version is UL 508A listed (File # E65324).
  • Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
  • Internal features are maximized for mounting options and vary with size:
    • Internal DIN rail mounting tabs molded into lid (except smaller 1555CF22 & 1555CF42 enclosures).
    • Standoffs (#6 self tapping screws) for P.C. board or inner panel

– Cover features a smooth recessed area perfect for membrane keypads or labels. Base features robust mounting flanges capable of withstanding abuse.

– Galvanized steel inner panels are available.

– Internal features include mounting bosses for PC boards or inner panels. DIN rail mounting locations on all but size “C” models. Silicone gasket with tongue and grooves construction provides a water-tight seal.

RCK Series – Knockdown Rack Cabinet

We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.

Features

  • Available in six (6) heights and two (2) depths.
  • Optional locking doors are constructed in 16-gauge steel. The doors install in minutes and are available in solid, vented, and tinted window.
  • Doors include a locking swing handle compatible with electronic locking handles.
  • The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
  • Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
  • Both the top and bottom-rear of cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessory.
  • The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora®  compatible mounting point.
  • Numerous cable tie-off points included for front-to-rear cable management.
  • Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
  • Cabinet base also includes mounting holes for optional casters or leveling feet.
  • Both top and cabinet base include an opening compatible with interchangeable “1923” sized top panels.
  • Cabinet ganging kit included.
  • Includes 50-pack of SCREW1032-50 screws.

Specifications

  • Cabinet frame constructed in 16-gauge steel.
  • Mounting rails constructed in 12-gauge steel.
  • Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for conduit.
  • Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
  • Include multiple bonding and grounding points.
  • Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
  • Finished in sand-textured black powder paint.
  • TAA compliant for GSA Schedule purchases.
  • RoHS Compliant.
  • Manufactured in North America.