Posted on March 7, 2022 by Jeff -
- Prevents shutdowns caused by overheating of electronic or electrical equipment in enclosures
- Reacts quickly to gradual or sudden temperature changes
- Contacts close when the temperature reaches the designated setting
- Temp-Stats can also be used for temperature control in convection and radiant heating applications
- Flange mount
- Contacts remain closed until there is a 10° F drop in temperature
- UL and CSA Listed (File # E332047, model TS-15-A)
- Service Life 100,000 cycles, Full Load
- Service Life 30,000 cycles, Full load
Posted on March 7, 2022 by Jeff -
- IP-rated vent for plastic and metal enclosures
- Breathable e-PTFE membrane keeps out water and dust
- Rated IP67 (submersible)
- Minimize the risk of gasket breach caused by changes in air pressure
- Reduce condensation that may corrode electronic components
- Body is made of corrosion-resistant, UV-resistant polycarbonate plastic
- Membrane is hydrophobic (water repellent) and oleophobic (low oil absorption)
- Seals using an O-ring washer
- Long, maintenance-free service life
- M6*1.5 vent plug
- 0.47 inches long x 0.55 inches diameter
- Airflow 160ml/min @dp=70 mbar
- Color: Gray
- *1 pound per square inch equals 6.895 KPa or 68.9476 mbar
- *About 0.0145 pounds per square inch equals 1 mbar (~0.015 psi)
Posted on March 7, 2022 by Jeff -
NBB Series
The NBB Series of NEMA boxes is one of Bud’s most popular enclosures for wet, dirty, and/or corrosive environments. They feature plastic latches and an all-plastic construction. Most of the gasketed enclosures in this series have been tested and approved to UL508-4x specifications, with a few being approved to UL50-4x. All NBB Series enclosures meet IEC529 IP66 requirements.
NBF Series
The NBF Series of NEMA boxes have plastic latches and hinges for an all-plastic construction. These gasketed enclosures meet NEMA 1, 2, 4, and 4x and IEC529-IP66 requirements, making them suitable for wet, dirty, and/or corrosive environments. This versatile family includes indoor and outdoor versions, versions with clear covers, and an option for a padlockable steel latch. Depending on the model, they are made of ABS, ABS polycarbonate blend, or polycarbonate-PBT blend plastic. The NBF Series is suitable for many applications.
Posted on February 21, 2022 by Jeff -
- Platt’s Custom Molded Case solutions are the best in class for protecting, professionally presenting, and organizing your equipment.
- Customized to your specific needs, these cases are ideal for computer, video, audio, medical, electronic instrumentation, and industrial equipment.
- Platt’s Engineering team is expert in designing your custom case, based on your requirements.
- Build your custom case to fit any needs. Size, pockets, protection, color, and portability requirements can all be customized.
- Cases are available with built-in wheels and telescoping handles.
- Foam interiors can be made to your individual requirements using any type of foam, including polyurethane foam, polyethylene foam, low abrasion, or anti-static foam.
- Options include different colors, stacking studs, TSA-accepted combination locks, wheels and telescoping handles, key locks, and padlock loops.
- Brand the exterior of your case with custom aluminum nameplates or with a molded-in logo.
- Platt is a distributor of Pelican cases and can customize your Pelican case with custom foam, branding, sewn accessories, and other work.
Click here for a sell sheet.
Posted on February 18, 2022 by Jeff -
- Build your custom case to fit any needs. Size, pockets, protection, color, and portability requirements can all be customized.
- Combine the lighter weight and sharp appearance of a custom sewn case with the protection and organization of a custom foam insert.
- Organize and protect your company’s tools with custom tool pallets and rolls – sewn specifically for your set of tools. These pallets can be used along with Platt’s extensive selection of tool cases.
- Brand your case with your logo – high-quality embroidery or silk screening is available.
- Great for sales and marketing reps – professionally display your products to end customers, and protect those products on the road
Click here for a sell sheet.
Posted on February 18, 2022 by Jeff -
- Platt’s custom-cut foam saves you time and provides the best in protection, professional presentation, and organization for your project.
- Platt is a full-fledged foam fabricator. Customize your foam insert for any case or any application to fit perfectly around your items.
- Platt’s Engineering team is expert in designing your foam insert, based on your requirements.
- Custom foam is available to use with any case, box, or other application. Platt is your one-stop shop for custom foam products, regardless of the application.
- Waterjet foam cutting cuts precise dimensions that give you a beautifully cut piece of foam.
- Many types of foam available, including polyurethane foam, polyethylene foam, low abrasion, or anti-static foam.
- Brand or identify your items with foam overlays that include text or logos. Label your parts or products to ease identification and product promotion.
- Add a velour topping to the foam for a more luxurious look to your insert.
- Great for sales and marketing reps – professionally display your products to end customers, and protect those products on the road.
Click here for a sell sheet.
Posted on February 18, 2022 by Jeff -
- Heavy-duty cases are great for shipping, transporting, and protecting your equipment.
- Tested for vibrations, water resistance, tumbling, and drops to meet ATA 300, category 1 specifications. Your equipment will be protected under the most difficult conditions!
- Get superior protection and travel light with the tough impact-resistant HMW polyethylene exterior. Provides the best in high-impact strength, durability, crack resistance, and chemical resistance.
- Filled with cubed “Pick-n-Pluck” foam to configure for your needs, or have Platt customize foam for a perfect fit.
- Heavy-duty aluminum rim and gasket, full-length piano hinge, and spring-loaded handles are designed to withstand difficult shipping and transportation conditions.
- Most cases include built-in TSA-accepted combination locks to keep your case contents secure while traveling.
- Most cases include wheels and telescoping handles for easy transportation.
Click here for a sell sheet.
Posted on August 18, 2021 by Jeff -
Key Features
- Watertight – heavy-duty extruded enclosures designed to house PC boards or for equipment interfacing.
- Sized for standard Eurocards.
- PC boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from one piece, extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded aluminum body includes a recessed area for labels or membrane keypad.
- End panels are rugged – yet easy to machine – die-cast aluminum with full perimeter self-adhesive gaskets.
- Designed to meet IP65.
- Choice of two versions – end panels without flange or with flange (for shelf or wall mounting).
Includes:
- Two diecast aluminum end panels – painted in a durable, black satin powder paint.
- Extruded, aluminum body (choice of either clear anodized or black powder paint finish).
- Two closed-cell polyethylene foam-end plate gaskets & rubber “O” rings for assembly screws.
- All hardware and self-adhesive feet.
- Replacement assembly screws can be purchased in 100-packs under part number 1457MS100
- NOTE: Recommended screw torque is 5 lbf/in
Available with black powder coat or clear anodize finish and with or without wall-mounting flanges.
Enclosure includes extruded body, die-cast end panels, gaskets, and hardware. Extra end panel kits are sold separately.
Built to be waterproof and very rugged.
Posted on August 18, 2021 by Jeff -
Features
- Designed for harsh industrial environments or outdoor applications (security, outdoor wireless, controls, etc.).
- Ideally suited for mounting printed circuit boards, panels, or DIN rail-mounted components.
- Designed for wall mounting. Interior is secure as lid screws are behind the lid. Can be made more secure if wall mounted with security screws (tamper-resistant screws).
- Satin texture finish with smooth recessed surface on lid for a membrane keypad or label.
- Standoffs molded in the interior of the lid & enclosure – designed for #4 x 1/4” self-tapping screws (our part number 1555TS100).
- Choice of two materials:
- General-purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use.
- Polycarbonate (material carries a UL flammability rating of UL94 5VA @ 3mm) – Recommended for outdoor use.
- Color is a light gray (RAL 7035) to help keep heat absorption down.
- Gasketed lid with two-piece “tongue & groove” construction prevents access from oil, dust, and water.
- Gasket is one piece made from high-temperature, UL-listed silicone. Supplied loose inside the enclosure (not preinstalled).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68.
- ABS Plastic versions are designed to meet IP66.
- Polycarbonate version is UL 508A listed (File # E65324).
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion-resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail-mounting tabs molded into lid (except smaller 1555CF22 & 1555CF42 enclosures).
- Standoffs (#6 self-tapping screws) for PC board or inner panel
Cover features a smooth recessed area perfect for membrane keypads or labels. Base features robust mounting flanges capable of withstanding abuse.
Galvanized steel inner panels are available.
Internal features include mounting bosses for PC boards or inner panels. DIN rail mounting locations on all but size “C” models. Silicone gasket with tongue-and-groove construction provides a watertight seal.
Posted on August 18, 2021 by Jeff -
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility with standard hardware components, and more. Every RCK is self squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The doors install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA-compliant rack rails.
- Both the top and bottom rear of cabinet feature a removable conduit knockout 1U panel. The top rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or leveling feet.
- Both top and cabinet base include an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50”, and 2.0” knockouts for conduit.
- Rear 1U panels include 1.375″, 1.125″, and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in sand-textured black powder paint.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Recent Comments