Posted on January 4, 2024 by Jeff -
Keep service personnel safe and protect the battery and electrical systems in your emergency vehicle, tractor, heavy-duty truck, or boat with the 75920 Series 36V Master Battery Disconnect Switch.
The heavy-duty battery disconnect switch ensures the safety of service professionals by disconnecting the battery from the vehicle’s electrical system, safeguards against battery drain from parasitic loads, and features built-in lock-out/tag-out for tampering and theft prevention.
As an IPX8-rated waterproof battery disconnect switch, it is ideal for a wide range of vehicles, including construction equipment, heavy-duty trucks, boats, and vehicles operating in harsh conditions, such as snowplows and snow removal equipment. Fitting a standard master disconnect mounting pattern, the 75920 series can be used as a drop-in replacement.
With a large knob that makes manual operation simple, plus clear switch position markings and 90° switch travel, the high-amp battery disconnect can effectively be used as a manual emergency power cutoff switch.
Features & Benefits
- High amperage continuous current capacity of 400A with a single 4/0 cable at 12V DC, 300A at 24V DC, or 200A at 36V DC
- IPX8-rated waterproof battery disconnect switch for external mounting on vehicles as well as installation on boats and marine equipment
- Can be used in high-side or low-side applications
- Black or gray thermoplastic housing with a UL 94 V-0 rating
- Tested per SAE J1455 for salt, calcium chloride, and magnesium chloride, delivering a rust- and corrosion-free high-amp battery disconnect
- Large red, yellow, or black knob makes the master battery disconnect switch easy to operate while wearing gloves, and the 90° switch travel makes it simple to identify the switch position
- Large divider on the base prevents accidental shorting of high-energy cables
Applications
- Heavy-Duty Truck
- Construction
- Agricultural Equipment
- Material Handling
- Mining
- Off-Road Vehicles
- Emergency Vehicles
- Marine
Click here for a datasheet.
Posted on January 4, 2024 by Jeff -
Cut all battery power to vehicle electrical systems with the TR Series 32V 500A Two-Pole Waterproof Master Battery Disconnect Switch. The dual-pole, single-throw (DPST) switch works in heavy-duty trucks, construction, emergency vehicles, bus and transit, military, and agricultural applications requiring the switching of two circuits or both positive and negative.
You can feel confident mounting the master battery disconnect switch in exposed locations thanks to its IP67 and IPX9K waterproof and dustproof ratings as well as its high shock and vibration tolerance.
The dual battery disconnect switch can be used to disconnect one or two batteries in either the positive or negative line, and it can be used to switch two vehicle voltage circuits simultaneously (24V and 12V).
Integrated lock-out/tag-out (LOTO) capability in either the on or off position using a padlock or hasp (not included) helps ensure personnel safety and vehicle security.
Features & Benefits
- Maximum continuous current of 500A per circuit with two 4/0 input and two 4/0 output cables or 350A per circuit with one 4/0 input and one 4/0 output cable
- IP67 and IPX9K waterproof and dustproof ratings enable mounting in exposed locations on the vehicle
- Drop-in replacement for competitive master disconnect switches when you need higher vibration (8 G) and shock (30 G) capabilities
- Built-in lock-out/tag-out in the on or off position using a padlock or hasp helps ensure the safety of service personnel and the security of the vehicle
- Available with a black, yellow, or red knob
- Four tin-plated copper M12 x 25 mm terminal studs
- Two holes for M8 or 5/16″ mounting
Applications
- Heavy Trucks
- Construction
- Emergency Vehicles
- Bus/Transit
- Military
Click here for a datasheet.
Posted on January 4, 2024 by Jeff -
Ideal for low-amp, low-voltage applications in off-road and construction vehicles and agricultural and marine equipment, the LAS Series 24V Compact SPST Manual Battery Disconnect Switch is available with M8 studs and a 100A continuous current rating or M10 studs and a 150A continuous current rating.
This battery disconnect switch features a compact design with pass-through mounting for installation where space is limited.
The removable red handle is easy to see and helps ensure safe operation of the compact battery switch by authorized personnel. Select models come with a rubber cap that provides protection when the actuator is removed.
Features & Benefits
- 24V low-voltage disconnect switch with single-pole, single-throw (SPST) circuitry
- Available with 100A (M8 studs) or 150A (M10 studs) continuous current rating to match your low-amp application
- Compact design enables pass-through installation in equipment and vehicles with limited space
- Removable red handle is highly visible and helps ensure safe operation
- Rubber cap on select models protects the battery cutoff switch when the handle is removed
- Weatherproof to IP43 standards
Applications
- Off-Road Vehicles
- Agricultural
- Construction
- Heavy-Duty Trucks
- Marine
Click here for a datasheet.
Posted on January 3, 2024 by Jeff -
The 1554 series comes molded in ABS or polycarbonate plastic and provides watertight protection for boards and other small electronic devices.
Features
- Ideally suited for mounting printed circuit boards or DIN rail-mounted components.
- ABS Versions are molded from general-purpose materials that carry a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV-stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL-listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two-piece “tongue & groove” construction prevents access from oil, dust, and water.
- Replaceable gasket is one piece made from high-temperature, UL-listed silicone. Supplied loose inside the enclosure (not preinstalled).
- Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size, which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion-resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self-captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D.”
- Threaded (M3) integral brass inserts and/or standoffs (#6 self-tapping screws) for PC board or inner panel mounting in all but the smallest size (“B”).
- Vertical PC card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Posted on January 3, 2024 by Jeff -
1556 series ABS plastic enclosures are ideally suited for mounting printed circuit boards, IoT equipment, and other small electronics.
Features
- Can be used in a tabletop configuration using rubber feet (included) or two different wall mount configurations using a wall mount foot kit (sold separately).
- Rounded corners and faces provide a more modern look.
- Lap joint construction prevents access from dust and splashing water.
- Available in black, gray, or white flame-retardant ABS plastic with a light satin texture.
- Molded from flame-retardant material which carries a flammability rating of UL94 V-0. For indoor use.
- Designed to meet IP54.
- Lid hardware and 4x rubber feet included with enclosure. Lid is secured with high-strength #6 x 1/2″ self-tapping Plastite screws.
- Aluminum inner panels are available as accessories. Sold separately.
- Multiple mounting locations inside the lid and base of the enclosure allow for easy PCB mounting or can be used with Hammond aluminum panels (sold separately).
- Accessories include aluminum inner panels and four-packs of mounting feet which can be used for flange mounting or keyhole mounting.
Posted on January 3, 2024 by Jeff -
1590 series rugged, die-cast aluminum electronic instrument enclosures are tough yet easy to machine and ideal for stomp pedals and other small electronic devices.
Features
- Lap joint construction protects access from dust and splashing water as well as improved EMI/RFI shielding.
- Unpainted version is vibra-finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not preinstalled).
- Low-side wall draft angle (two degrees or less) for easy PCB mounting.
Posted on January 3, 2024 by Jeff -
The 1590ZGRP series consists of tough, fiberglass-reinforced polyester enclosures ideal for housing electronic equipment in high-impact and industrial environments.
Features
- Molded from a gray glass reinforced polyester. Smooth finish.
- Includes gasketed lid with two-piece tongue and groove construction.
- Heavy-duty thick wall design.
- North American Mark of Safety – C UL & UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) – File #E65324 and IP66 Rated.
- Impact rating of IK08 per IEC62262.
- Lid contains self-captivated stainless steel screws.
- Gasket material is EPDM sponge rubber with temperature rating of -40 degrees C to +120 degrees C (-40 degrees F to +248 degrees F).
- Easy wall-mounting construction – mounting holes outside of the gasket protection.
- Internal mounting shelf and bonding nuts molded in.
- Optional 16 gauge, galvanized steel inner panels available.
Posted on January 3, 2024 by Jeff -
Hammond’s Eclipse is our best-selling electrical enclosure series and provides a strong and adaptable enclosure for industrial applications.
Applications
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wall mount applications.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, and 12
- CSA Type 3R, 4, and 12
- Mounting foot kit required to maintain UL/CSA external mounting requirements.
- Complies with
- IEC 60529, IP66
- NEMA Type 3R, 4, and 12
Construction
- Formed 14 (24×24″ and larger) or 16 (24×20″ and smaller) gauge steel.
- Smooth, continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latching: Type A has slotted quarter turns, Type B has a handle with 3-point latching, Type C has a handle with 3-point latching plus additional quarter turns top and bottom.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in-place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall-mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Hinges are constructed from 304 stainless steel. Hinge pins are stainless steel.
- Quarter turn latch and multipoint handle (key lockable) are zinc die cast with black epoxy finish.
Finish
- Cover and enclosure are phosphatized and finished with a recoatable powder inside and out with choice of ANSI 61 smooth Gray (GY) or RAL7035 textured light gray (LG).
Posted on January 3, 2024 by Jeff -
RAS series universal rack shelves are made to be installed into 19” racks and provide a strong surface for rack components.
Features
- Constructed of 14- or 16-gauge steel.
- Universal design mounts to any standard EIA-compliant rack or cabinet.
- Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
- Mounts to rack rails either as an internal shelf or external shelf/work area.
- Available in either vented or solid versions.
- Up to 200 lbs (91 kg) static load rating.
- Rugged textured RAL9005 black powder coat finish. Complies with the Greenguard guidelines for indoor air quality.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant
- Manufactured in North America within an ISO 9001:2015 certified facility.
Posted on December 19, 2023 by Jeff -
LP9 RGB – Illuminated, Sealed Pushbutton Turns Nearly Any Color
The LP9 RGB is a snap-action, LED, commercial-grade watertight switch.
Features
- LED package contains three separate LEDs (red, green, blue) that can be combined to produce almost any color.
- Full-button illumination
- Flush or raised glossy button
- Positive tactile feedback
- Short behind-panel depth
- Withstands extreme shock and vibration
- Watertight to IP68S
- RoHS compliant
- 2VDC LED input
Recent Comments